Bergeon Products
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
You save (%)
Very-Fine ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Semi-Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4in Diameter, 3/4in Thick, 1in. (25mm) Hole Diameter with a 3/8in.(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
You save (%)
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
You save (%)
This is the double ended replacement tip for Bergeon Swiss Made Spring Bar Tool (6111). The tip is reversible with a pointed tip on one end and a forked tip on the other.
You save (%)
Plastic Compartment Box. 10 compartments. 24 mm deep.
You save (%)
Fine silicium carbide circular abrasive wheel by Bergeon
Produces a Fine Satin Slightly Matte Finish
You save (%)
1.20mm forked remover for watch hands, wheels and rollers.
You save (%)
Drum barrel made to fit over a standard watchmaker’s screwdriver to give you a better grip and more torque. With a knurled finish, the barrel attaches to screwdriver with a set-screw. 4 sizes available.
You save (%)
First quality rotating stand with 9 screwdrivers from Bergeon. Very stable stand with adherent rubber plate.
You save (%)
Self adhesive. Stops tools rolling on the work bench.
You save (%)
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
You save (%)
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
You save (%)
Bergeon Luminous Paste Varnish – refill for BG5680. Mix with luminous powder and thinner.
You save (%)
Bergeon Luminous Paste kits in six colors: White, green, yellow, blue, red & orange
You save (%)
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
You save (%)
Plexi-cylinder Bergeon ref. 5555-98 -TP. Made for waterproof tester Bergeon Ref. 5555-98
You save (%)
This is the complete gasket replacement kit for the Bergeon 5555/10 waterproof tester. Contains 15 different rubber o-ring gaskets.
You save (%)
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
You save (%)
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
You save (%)
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
You save (%)
Bergeon pair of small levers for removing hands have plastic handles, two different tip widths. Swiss.
You save (%)
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Red
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Green
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Blue
You save (%)
Soft and will not scratch the parts. Matches the shape of watch cases with different geometries.
You save (%)
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
You save (%)
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
You save (%)
3mm Transparent plastic stick can be sharpened without flaking. 5″ long.
You save (%)
Bergeon 5011-B Replacement Key for Crown & Stem Removal
You save (%)
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
You save (%)
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
You save (%)
Bergeon watch case opener. Swiss made. Lever width 5mm, lever length 110mm.
You save (%)
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
You save (%)
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
You save (%)
Pin Vice for cutting broaches. Reamer with chuck opening.
You save (%)
Vissin special formula acidic solution removes broken steel screws from brass watch plates without damaging plates. Use crucible and crucible stand to heat. 50mL
You save (%)