Bergeon Products
This is the replacement reservoir and tube for the Bergeon Watch Oiler. Fits 7718-1A
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.
Measures the size of watch hand holes
Gauges watch hands from .30 mm to 2.0 mm
Also features a gauge to measure the length of watch hands
Size 2 X 1 X 1″ Inches (45 X 45 X 15mm)
Swiss made
Loupe holder that is designed to clip onto glasses. Coated wire frame won’t scratch the loupe. Replaces Bergeon 5913-R.
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.
Three piece Bergeon pin vice assortment. Sizes included: 0.0-0.5mm 0.5-1.0mm/1.0-1.5mm 1.0-1.5/1.50-2.0mm
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
Bergeon 31081 Screwdriver to Remove Etachron Pitons
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Bergeon 7100 Movement Holder – specifically for ETA 6497. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
Better grip thanks to it’s anodized aluminium handle Ø 23 mm. Stainless steel blade. Total length: 138 mm.
Tool for fitting and removing spring-bars with fine points and forks. Replacement tips available.
Handle in stainless steel, points in hardened tempering steel.
Length : 145 mm
Swiss Made Bergeon screwdriver set. Set includes sizes: Ø 0.50 – 0.60 – 0.80 – 1.00 – 1.20 mm. Replacement blades available here.
Tool for fitting and removing spring-bars from watch bands. With standard points and forks, replacement tips available. See 3153A or 3153B.
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
Bergeon blue automatic oiler. 0.24mm, High Precision, Stainless Steel Needle, Anti-Static Handle.
Cleaning Pad for sticks. Extends life of each Bergeon cleaning stick!
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Small parts basket for ultrasonic cleaning. Diameter 20 mm. Height 13 mm.
Swiss made precision plastic/bakelite blower. Will not roll off bench. Made to fit in your hand.
Bergeon Presto watch hand remover allows quick and easy removal of most watch hands. Specially designed ends prevent the tool from damaging the watch dial surface when removing hands.
Oil-cups
Coloured synthetic-material.
Ø 34 mm.
Tinged glass oil-cups Ø sink 6 – 12 mm.
SELVYT and SELVYT-SR polishing gloves
Knitted cuff. Without strand deposit on pieces to be polished. Can be washed several times.
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
Bergeon black automatic oiler. 0.18mm, High Precision, Stainless Steel Needle, Anti-Static Handle.
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
Very soft light brown natural grease used in general purpose for lubricating barrels. Recommended for lubrication of all types of barrels.
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing wheels on third wheel arbors and for chronograph driving wheels with 5 spokes. Blue handle.
Beregon 30409-A watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 3.0-4.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
Made of hardened steel with mirror polished tips. Notched for easier positioning. Anodized aluminum handles. Tips are 2.5mm wide by 0.15mm thick. These are probably the best hand levers on the market.
For use with ETA calibers: 2892A2, 2893-1-2-3, 2894-2, 2895-2, 2896, 2897.
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
This tool extracts bezels from divers watches. Provide with three different clamping jaws. Removes bezels from 27mm to 45mm.
Set of 4 screwdrivers with hexagonal blades. 54/56 HRC Hardened stainless steel blades. In plastic storage pouch. Includes sizes: 1.50mm, 2.00mm, 2.50mm & 3.00mm
1 tool with black handle including: 1 end piece in grey PVC with a hole of ∅ 1.50 mm. 1 end piece in red PVC with a hole of ∅ 0.80 mm. Tips are replaceable.