Bergeon Products
Bergeon blue automatic oiler. 0.24mm, High Precision, Stainless Steel Needle, Anti-Static Handle.
Cleaning Pad for sticks. Extends life of each Bergeon cleaning stick!
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Small parts basket for ultrasonic cleaning. Diameter 20 mm. Height 13 mm.
Swiss made precision plastic/bakelite blower. Will not roll off bench. Made to fit in your hand.
Bergeon Presto watch hand remover allows quick and easy removal of most watch hands. Specially designed ends prevent the tool from damaging the watch dial surface when removing hands.
Oil-cups
Coloured synthetic-material.
Ø 34 mm.
Tinged glass oil-cups Ø sink 6 – 12 mm.
SELVYT and SELVYT-SR polishing gloves
Knitted cuff. Without strand deposit on pieces to be polished. Can be washed several times.
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
Bergeon black automatic oiler. 0.18mm, High Precision, Stainless Steel Needle, Anti-Static Handle.
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
Very soft light brown natural grease used in general purpose for lubricating barrels. Recommended for lubrication of all types of barrels.
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing wheels on third wheel arbors and for chronograph driving wheels with 5 spokes. Blue handle.
Beregon 30409-A watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 3.0-4.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
Made of hardened steel with mirror polished tips. Notched for easier positioning. Anodized aluminum handles. Tips are 2.5mm wide by 0.15mm thick. These are probably the best hand levers on the market.
For use with ETA calibers: 2892A2, 2893-1-2-3, 2894-2, 2895-2, 2896, 2897.
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
This tool extracts bezels from divers watches. Provide with three different clamping jaws. Removes bezels from 27mm to 45mm.
Set of 4 screwdrivers with hexagonal blades. 54/56 HRC Hardened stainless steel blades. In plastic storage pouch. Includes sizes: 1.50mm, 2.00mm, 2.50mm & 3.00mm
1 tool with black handle including: 1 end piece in grey PVC with a hole of ∅ 1.50 mm. 1 end piece in red PVC with a hole of ∅ 0.80 mm. Tips are replaceable.
Assortments of 3 Bergeon screwdrivers with 1 spare blade per diameter.
In cardboard box. First quality, chromium-plated. Sizes ø 0.50 – 0.60 – 0.80 mm.
Adhesive cleaning swabs ∅ 2.80 mm
Polyurethane head. Washable and re-usable.
Package of 10 pieces
Set of 15 Reamers and Spindle from Bergeon.
3mm Transparent plastic stick can be sharpened without flaking. 5″ long.
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
A premium collection of 9 Swiss Screwdrivers on a rotating stand including 9 spare blades. Hardened stainless steel blades. Sizes: 0.50, 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50 mm.
Bergeon bracelet cutter. Cuts sprues up to 1/8″ (3mm) thick. Jaws are 7/8″ (2mm) long and pointed for easier access to tight areas. Made in Switzerland.
Bergeon green automatic oiler. 0.32mm, High Precision, Stainless Steel Needle, Anti-Static Handle.
Bergeon Ergonmic Oilers. Set of Four Oilers: Red/Blue/Green/Yellow, High Precision, Stainless Steel Needles, Anti-Static Handles
Pin Vice for cutting broaches. Reamer with chuck opening.
Bergeon watch case opener. Swiss made. Lever width 5mm, lever length 110mm.
For use with ETA calibers: 2824-2, 2834-2, 2836-2.
Base for screwing and unscrewing bracelets. Includes 4 screwdriver blades 1.0, 1.4, 1.8, 3.0 mm. Blade height can be easily adjusted with the thumb screw. 70mm base.
Measurements adapted to quartz watches. For measuring the thread of winding stems and crowns and the diameter of tubes, joints and crowns. Also suitable for measuring the distance between the lugs of watch cases. Dimensions: 85 x 85 x 85 x 1 mm.
For tweezers BG-6571-BUR-3. 1 pair of replacement tips.
Recover small metal parts easily with the Bergeon Magic Wiper Magnetic Sheet. Paper component collector is tear-proof and washable. Easy to use and clean. Consists of two double-sided magnet strips. Supplied flat. Folded dimension: 11-1/4″ x 3-1/4″ (285mm x 82mm). Bergeon 7871.
High quality tweezers for watchmakers. Wooden tips Quick and easy replacement of tips Non-magnetic steel tweezers
Mainspring Grease, Use in Watches 9 3/4-19 Lignes, Specifically for Automatic Mainsprings, 50ml.
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
Cover all your bases with this 7 piece Luxor polishing compound set. From pre-polishing to final high shine luster, this set has it all. Use with felt or cotton buffs.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Drop injection oiler. For train wheel pivots, cup bearings, everywhere the oiler has to be positioned before depositing oil.
Drop deposit oiler. For pallets, mechanical parts, oiling spots difficult to reach.
Bergeon 7100 Movement Holder – specifically for ETA 7750 series. Will also work with Sellita SW500. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
Pair of levers for clocks and alarm-clocks. In hardened steel. Specular polish work surface. Length: 210 mm.
Die-cast sturdy oiler -4 cups
Brushed / sanded finish
Replaceable felt pad located in center of oilers
Swiss made
Plexi-cylinder Bergeon ref. 5555-98 -TP. Made for waterproof tester Bergeon Ref. 5555-98
Very-Fine ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4in Diameter, 3/4in Thick, 1in. (25mm) Hole Diameter with a 3/8in.(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Bergeon yellow automatic oiler. 0.45mm, High Precision, Stainless Steel Needle, Anti-Static Handle.