Bergeon Products
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
You save (%)
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
You save (%)
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
You save (%)
Bergeon pair of small levers for removing hands have plastic handles, two different tip widths. Swiss.
You save (%)
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Red
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Green
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Blue
You save (%)
Soft and will not scratch the parts. Matches the shape of watch cases with different geometries.
You save (%)
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
You save (%)
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
You save (%)
3mm Transparent plastic stick can be sharpened without flaking. 5″ long.
You save (%)
Bergeon 5011-B Replacement Key for Crown & Stem Removal
You save (%)
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
You save (%)
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
You save (%)
Bergeon watch case opener. Swiss made. Lever width 5mm, lever length 110mm.
You save (%)
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
You save (%)
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
You save (%)
Pin Vice for cutting broaches. Reamer with chuck opening.
You save (%)
Vissin special formula acidic solution removes broken steel screws from brass watch plates without damaging plates. Use crucible and crucible stand to heat. 50mL
You save (%)
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.
You save (%)
Assortments of 3 Bergeon screwdrivers with 1 spare blade per diameter.
In cardboard box. First quality, chromium-plated. Sizes ø 0.50 – 0.60 – 0.80 mm.
You save (%)
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
You save (%)
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size.
You save (%)
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold small watch movements from 9 mm (3 ¾ ligne) to 25 mm (11 ligne) in size.
You save (%)
Tool for fitting and removing spring-bars from watch bands. With standard points and forks, replacement tips available. See 3153A or 3153B.
You save (%)
Watch crown winding tool made of black anodized aluminum. Swiss made.
You save (%)
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
You save (%)
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
You save (%)
Bergeon 31081-TETC Screwdriver with blade to turn ETACHRON pitons. Fine adjustment of the spiral centering between the racket pins
You save (%)
Bergeon 31081 Screwdriver to Remove Etachron Pitons
You save (%)
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
You save (%)
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing wheels on third wheel arbors and for chronograph driving wheels with 5 spokes. Blue handle.
You save (%)
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.
You save (%)
Bergeon Presto watch hand remover allows quick and easy removal of most watch hands. Specially designed ends prevent the tool from damaging the watch dial surface when removing hands.
You save (%)
Swiss made slide locking jaws are specially designed to hold barrel arbors. 1.00mm diameter opening.
You save (%)
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
You save (%)
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
You save (%)
Swiss made precision plastic/bakelite blower. Will not roll off bench. Made to fit in your hand.
You save (%)
Set of 15 Reamers and Spindle from Bergeon.
You save (%)
Rust remover from Bergeon. Excellent for watchparts. Bottle of 50gr.
You save (%)
Measures the size of watch hand holes
Gauges watch hands from .30 mm to 2.0 mm
Also features a gauge to measure the length of watch hands
Size 2 X 1 X 1″ Inches (45 X 45 X 15mm)
Swiss made
You save (%)
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
You save (%)
Beregon 30409-C watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 4.0-5.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
You save (%)
Beregon 30409-A watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 3.0-4.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
You save (%)
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.80 1.00
You save (%)
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.60-0.70mm
You save (%)
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.40-0.50mm
You save (%)
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
You save (%)
Die-cast sturdy oiler -4 cups
Brushed / sanded finish
Replaceable felt pad located in center of oilers
Swiss made
You save (%)
Bergeon 30102 Watch Dip Oilers (individual)
You save (%)
A premium collection of 9 Swiss Screwdrivers on a rotating stand including 9 spare blades. Hardened stainless steel blades. Sizes: 0.50, 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50 mm.
You save (%)
5 pieces set in pouch. Includes: 0.80-1.00-1.20-1.40-1.60. Hardened stainless steel blades. Swiveling hexagonal head in self lubricating, synthetic POM (Derlin) material.
You save (%)
5 pieces set in pouch. Includes: 1.20-1.50-2.00-2.50-3.00. Hardened stainless steel blades. Swiveling hexagonal head in self lubricating, synthetic POM (Derlin) material.
You save (%)