Horotec
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
Horotec Assortment of Case Back Screws, Phillips Head. 17 sizes, 10 pieces each size
Horotec Assortment of Case Back Screws, Round Head. 18 sizes, 10 pieces each size
Horotec Assortment of Case Back Screws, Flat Head. 18 sizes, 10 pieces each size
Casing cushion with a chromed metallic ring. 75mm in diameter.
Asco Swiss Made loupe. Type H, 7x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 3.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 3x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 2.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 10x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 4x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Small tool for bracelet screws.
– 3 blades Ø 1.00, 1.40 and 3.00 mm
– Metal anti-skid base.
Waterproof Crown Assortment Stainless 4.50mm-10.00mm x 2.00 Tube x 0.90 Tap.
Waterproof Crown Assortment Stainless 4.50mm-10.00mm x 2.50 Tube x 0.90 Tap.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
Oscillating Weight Axle Punch for Rolex 1530/1570
Oscillating Weight Axle Punch for Rolex 2130/2135
Oscillating Weight Axle Punch for Rolex 2030/2035
Oscillating Weight Axle Punch for Rolex 3035/3135
Horotec Carbon Tip Tweezers, Extra Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Molykote DX Grease, 50 Gram Tube. ETA recommended lubrication of metal components for certain calibers.
Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
This steel tool is used to install the Rolex® screw on pushers into a Rolex® watch case. McCaw Co. is independent of and not affiliated with or sponsored by Rolex®. Warranty does not apply to non-genuine parts supplied by McCaw Co.
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
Oil cup in red anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in blue anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in green anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in yellow anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
Aluminum tweezers with fine PEEK tips. Tips are replaceable. 4 3/4″ in length.
Aluminum tweezers with very fine PEEK tips. Tips are replaceable. Use MSA12.764-A for replacements. 4 3/4″ in length.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Aluminum tweezers with curved, fine PEEK tips. Tips are replaceable. Use MSA12.765-A for replacements. 4 3/4″ in length.
Horotec Hand Remover Set, 4mm width. Works for many pocket watch hands.
A pair of hands removers for sweep second hands and the small counter hands of chronographs. Tip width 1.0mm, length 105mm
20mm, 30mm, 33mm & 42mm 5 prong case back openers for Omega Seamaster watches. Horotec Swiss Made.
For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Four-oil cup chrome-plated stand. The complete set is chromed and incudes : – 4 cups in anti-hygrometric glass – 1 mobile black plastic lid to protect oil from dust – 3 holes filled with pith wood for cleaning the oilers – 1 groove for oiler storage – 1 anti-skid rubber sole to ensure a good […]
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
Generic Microstella wrench for regulating the balance on Rolex calibers
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
BLASOLUBE® 301 universal lubricant grease for a very wide-ranging use. Excellent for high pressure applications. – Soft consistency – Temperatures use range : from -30° C up to +120/150° C.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
Screwdriver sizes include: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.0, 2.5 & 3.0. Replacement blades included. Swiss made.
3 pliers with end cutting, round and serrated flat jaws. Swiss Made.