Horotec
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Latex roll on finger cots size large. Package of 100 pieces.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
20mm, 30mm, 33mm & 42mm 5 prong case back openers for Omega Seamaster watches. Horotec Swiss Made.
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 35mm in diameter.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 45mm in diameter.
Slotted Plastic Block Horotec is made of high impact plastic. This slotted block has 9 holes, and 8 slots, slots measure from 2.8 mm wide to 6.3 mm wide.
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Horotec Replacement Screwdriver Blades, Curved Style for better screw fit. These are the replacement blades for MSA01.207. 13 sizes
Replacement Tip for Horotec Case Opener MSA07.115 – 2mm
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Tool on stand for removing rollers. Hole puncher with cracked hardened plate on both sides, “V” shape to remove the adjusted plate on a balance staff.
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Small tool for bracelet screws.
– 3 blades Ø 1.00, 1.40 and 3.00 mm
– Metal anti-skid base.
For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.
The Turbo tester tests quartz wheel trains without opening the watch. Swiss made. The Turbo tests the mechanical side of a quartz analog watch movement.
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Tool for assembling and disassembling screw-on watch pushers and watch tubes, and watch oscillating weight bolts. Assortment of 14 interchangeable keys in metal storage base.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Swiss made screwdriver. Replacement blades sold here.
Molykote DX Grease, 50 Gram Tube. ETA recommended lubrication of metal components for certain calibers.
Horotec movement holder with central screw for caliber 1530-1570
Horotec movement holder with central screw for caliber 2035-2135
Horotec movement holder with central screw for caliber 3035
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Four-oil cup chrome-plated stand. The complete set is chromed and incudes : – 4 cups in anti-hygrometric glass – 1 mobile black plastic lid to protect oil from dust – 3 holes filled with pith wood for cleaning the oilers – 1 groove for oiler storage – 1 anti-skid rubber sole to ensure a good […]