Jewelry Tools
Browse Subcategories
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only Sold individually.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only. Sold individually.
Ground from blanks of hardened high speed steel, these files have smooth, unbroken flutes. The design is particularly well-suited for filing mild steels and ductile, stringy materials such as aluminum, brass, lead and magnesium. They can also be used on some grades of plastics. Ground cut rotary files perform best at medium speeds in flexible shaft machines and air tools.
1/4″ shank with 2 1/4″ overall length
Use for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the Flat file without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom – One edge single cut – One edge is safe.
The Mill file has many applications such as sharpening saws and tools, finishing metal, lathe work, draw filing as well as general shop use. All sides are single cut.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.4 mm)
Cut 2
BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.
This 14pc Tap and Die set has screwplate with taps for threading wire or re-threading stripped threads on screws. Sizes 0.7 – 2.0mm.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Solid felt wheel assortment includes 1/2″, 5/8″, and 3/4″ diameter wheels in the soft grade. For use with a mandrel.
Sold by the box of 1.
1/2″ diameter, brass center, medium grit, aluminum oxide. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center to provide firm grip on tapered spindle. Sold individually.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Leather center provides firm grip on tapered spindle. Sold individually.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Diameter: 1″
Fine
3/32″ Shank
Sold by the dozen
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.