Jewelry Tools
Browse Subcategories
For closing and adjusting pendant bows and bending rings. With box joint. Overall length is 6″ (152 mm). Economical value.
Avoid the high cost of prescription safety glasses. Save money over prescription safety glasses. Safety glasses and corrective lenses combined into one, for close-up work. These glasses compare to drug store “readers” while conforming to ANSI Z87.1 2003 specifications for high impact protection. Check with your Eye Doctor for the best diopter model for you.
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 6
High-quality polishing cloth. Soft, velvety, no-lint texture polishes surfaces without scratching. Use on jewelry, silverware, eyeglasses, cd’s. It will retain its softness and suppleness even after repeated washings. Measures 17″ x 14″
For alcohol, benzene or other solutions. Edges of covers and cups are ground to form a tight seal, keeping dust from entering and protecting solutions from evaporation.
Ideal for polishing concave surfaces on small objects. Made of solid felt with hard density. Use with tapered mandrel.
Diameter: 1/4″
Length: 1/2″
Sold by the Box of 25.
Economical, imported loupes with ground and polished lenses set in lightweight black plastic frames. Working distance is 4″ with 2 1/2″X power.
Economical, imported loupes with ground and polished lenses set in lightweight black plastic frames. Working distance is 2″ with 5X power.
The protective heat-holding cover makes this efficient for melting with a torch. Handy pouring openings. Made of fused silica with clay bond, for melting temperatures up to 2500°F (1371°C). Best choice for gold, silver, bronze, etc.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
1-5/16″ dia. x 11-1/4″
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90 in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
Kit includes inner shaft, pair of motor brushes, grease, and operation manual.
With a combination wood and metal frame, this inexpensive cutter is perfect for 7-3/8″ gift wrap rolls. Features holes in the base which allow it to be screwed permanently to table or bench top. 2-1/4 lbs.
Stepped aluminum mandrel securely mounts on a steel base and easily rotates 360″. The smooth round steps allow you to precisely size rings when wax working or using metal clay. Mandrel is clearly marked with sizes 4-13 and can be removed from the stand for handheld use. Total length: 13″.
Tweezers are very soft and non-magnetic
Include the following styles: #3, #5, AA, MM and AM
Come in a convenient storage pouch
Create unique patterns with this set of 12 double-ended shapers for a total of 24 shapes. With very fine tips the possibilities are nearly endless. Simple to use and made of a non-stick hard plastic material for easy clean up.
This assortment of six popular sizes with plastic handles contains sizes 46 through 72 (according to English Stubs gauge). Our broaches are five-sided and have a regular taper and perfect finish. Made in Germany.
Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.
One ounce of concentrated granules is mixed with one gallon of water to form a fast-acting solution.
Hollow ring sticks are perfect for measuring rings 1 to 15 in quarter sizes by US standards. Gauge shows the length of material needed to make specific sizes of rings.
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
For picking up crucibles and 1-1/2 inches (38 mm) diameter flasks. Length: 19 inches (483 mm)
Handles are knurled. Overall Length: 6-1/4″ (160 mm) Width: 9/64″ (3.7 mm) Cut 6
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. 1 pound box.
Contains 7 blades for measuring the most popular diamond shapes: round,baguette, square, pear and marquise stones.
Jewelers Sawframe with End Screw, 2-1/2″ Depth
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Made of solid aluminum ring stick with groove, is graduated in quarter sizes from 0 to 13 by US standards.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/4″
Soft
Sold by the Box of 100.
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 3-1/2″ x 3-1/2″
Frame for 5 inch pinned blades
Designed with “S” bends to the frame, it accommodates unobstructed viewing directly over the area to be cut. The frame is equipped with an ergonomic pistol grip handle fabricated with reinforced fiber-filled plastic. Knurled thumbscrew provides easy-to-use blade tension control. Manufactured at our factory in Vallorbe, Switzerland.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
Suitable for all purpose polishing and buffing. Pin hole centers.
Diameter: 3″
Thickness: 1/2″
Extra Hard
Steel wire bristles mounted on wood handle, for removing particles clogging teeth of file. Overall length 10″
For use in low temperature brazing and silver soldering ferrous and non-ferrous metals.
Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality.
Sightglass With Washers and Gaskets for 23.720G Grobet Jewelry Steam Cleaner
The jaws are made of hardened tool steel The cutters are able to cut memory wire up to 16 gauge and sprues up to 1/8″. The Grobet Compound cutter has an overall length is 8-1/2″ and a jaw length of 5/8″.
Made of stainless steel with stainless steel extra-fine mesh, this medium size cleaning basket holds the smallest of items and parts safely when cleaning. Style: Extra-fine mesh. Dimensions: 5″ x 4″ x 3″.
POLINOXX A*F is a new polishing paste developed for an exceptional finish on stainless steel, nickel and titanium.
Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Made of stainless steel with stainless steel fine mesh our economical baskets offer the user a size for every need. Dimensions: 5 x 4 x 3.
Oval-shaped steel burnishers for smoothing of bezels around stones and smoothing other parts of soft metals. Highly polished blades are firmly set in wood handles.
Slot holds emery paper so it can be wound around mandrel to desired thickness.