Jewelry Tools
Browse Subcategories
Our solder cutting pliers offer two ways to cut. It cuts sheet solder in 1/16 -1.60mm- squares or wire solder up to 18 gauge in 1/16 -1.60mm- lengths.
5 -125mm- bending pliers offer the best quality/price combination anywhere. Stainless steel box-joint construction and blue textured PVC grips assure years of satisfaction.
Use for support to flatten pieces or lay out work. Flat anvil is smoothly finished. Adjustable clamp enables you to use it on benches up to 2″ thick.
Invented by a stone setter, our new Power Set pliers can be used for setting virtually any size stone.
Swiss-made rubber model has a plastic sheathed nozzle. Measures 5 x 2 and weighs 2 oz.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
1/2″ Diameter 3/32″ Shank. Sold by the dozen.
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
Vigor Super Glue sets in 45 to 60 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. No-drip, precision applicator allows for glue to be dispensed one drop at a time. Pack of 5 – 2 Gram Tubes
Ingenious dispenser contains solder with flux. The proper amount of solder and flux can be placed at the exact point required, eliminating waste and improving the appearance of the joint. Solder contains no cadmium. 1/2 oz.
Solid felt wheel assortment includes 1/2″, 5/8″, and 3/4″ diameter wheels in the soft grade. For use with a mandrel.
Sold by the box of 1.
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 3/8″
Weight: 1 Pound Box
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Sold by the box of 100.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Extra Fine
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge: Square
Santaper Belts, Sold by pack of 10. Available in 120, 240, 320, 400 & 600 grits.
This rack features a 7-1/2″ bar area for easy accessibility to your favorite pliers. Two “tray extensions”, each with two round depressions, for holding small parts or bits of solder.
Our 1.0mm x 1.7mm oval hole punch pliers will punch copper or silver as thick as 22 gauge. With ergonomic handles and tempered replaceable pin these pliers will save you time and money.
For wire or heavy metal strands where you don’t want to ruin your normal cutters.
32-5/8″ long, standard material outer sheath comes equipped on ALL Flexades: S.B0-516, S.B0-14, S.B0-12, S.B0-38
Ideal for polishing concave surfaces on small objects. Made of solid felt with hard density. Use with tapered mandrel. Diameter: 1/4″ Length: 3/8″ Sold by the Box of 25.
Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 8-1/4″.
Use with rouge to produce the highest finish on gold. Stitched with leather patch. on center for firm grip on tapered spindle.
Diameter: 3″
Ply: 12
Available in 1/4 oz. sheets.
Grade: Easy
Melting Point: 1240°F (671°C)
3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).
Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Includes tube of flexible shaft lubricant(grease) and a set of replacement motor brushes.
3mm points for hard-to-reach areas.
Available in 3 grits – hard, medium, and high-shine.
Use with mandrel #117.0894
Nature’s Touch Citric Acid Pickle is a mild pickling solution used for silver, gold, brass and copper.
This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.
The Bench Pin Saw Vise is the perfect tool for holding metal wood or plastic for easy sawing. A necessity for the jeweler’s bench as well as for the hobbyist or craft person. Fits in standard bench slot or clamps on table.
A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool
Great for stamping, chasing and forming these 5″ Round Leather Sandbags can be used with or without a bench block.
Loctite Threadlocker Blue 242 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 6ml
Strong loosening fluid for screw in syringe 6 cc.
Latex roll on finger cots size large. Package of 100 pieces.
Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3
For use in low temperature brazing and silver soldering ferrous and non-ferrous metals.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
This vise with 2 inch jaws offers a choice of clamping or screwing onto the bench. An excellent value and a necessity for every bench.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use. Sold by the dozen.
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 4
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 3/32″ (2.5 mm)
Cut 4
Our blue-handled French shears can cut up to 20 gauge sheet stock. With narrow points for easy maneuvering, this series features the best blades made.
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 1/4″
Weight: 1 Pound Box
A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.
Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications.
Handles are knurled. Overall Length: 5-1/2″ (140 mm) Width: 13/64″ (5.1 mm) Thickness: 3/64″ (1.3 mm) Cut 2
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 13/16″
3/32″ Shank
Sold by the Dozen.
High quality extra fine diamantine powder produces a final high luster on parts and tools.
Made of 100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer with minimal fraying and better compound retention. Achieve a smooth, uniform finish with superior coloring quality every time.
Diameter: 7/8″
Ply: 16
Stitching: 1 Row
Shellac Center
Sold by the Dozen
Spring action holds screwdriver firmly in place. Steel wheels are carefully set into body to provide even action when wheeled over stone. Overall width is 19/16″ (40mm).
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
Removes rust and dirt from metal surfaces. Fine glass bristles are bound in cord to unwind as bristles wear down. Length 7″, diameter 1/2″.