Jewelry Tools
Browse Subcategories
Use to prepare surfaces for soldering, remove excess solders, remove burs, etc. Sharp from handle to tip and can be resharpened on a bench stone.
You save (%)
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.
You save (%)
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
You save (%)
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
You save (%)
Screwdriver sizes include: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.0, 2.5 & 3.0. Replacement blades included. Swiss made.
You save (%)
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
You save (%)
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
You save (%)
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Made in France. Includes rotating stand. Screwdriver sizes 0.50-3.00mm.
You save (%)
Horotec Carbon Tip Tweezers, Extra Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
You save (%)
Horotec Carbon Tip Tweezers, Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
You save (%)
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
You save (%)
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
You save (%)
Latex roll on finger cots size large. Package of 100 pieces.
You save (%)
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
You save (%)
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
You save (%)
Horotec red anodized aluminum loupe fitted with a threaded ring. Lightweight and compact. 5X = 2″ focal distance.
You save (%)
Horotec Replacement Screwdriver Blades, Curved Style for better screw fit. These are the replacement blades for MSA01.207. 13 sizes
You save (%)
Horotec stainless steel replacement screwdriver blades. Blades will fit MSA01.020 & MSA01.218 screwdrivers/sets
You save (%)
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
You save (%)
Knurled anodized aluminum handle for optimal grip Ergonomic head in black POM Interchangeable stainless steel blade Sizes 0.50, 0.60, 0.80, 1.00, 1.20, 1.40 & 1.60
You save (%)
Twin hose assemblies are supplied with connections (9/16″ fittings). Comes in 10′ length. Hoses are black with color coded lines. Red for fuel and green for oxygen. Included are ferrules and ferrule tools. Made with DuPont™ Kevlar® Fiber
You save (%)
Used on regulators so that standard ID hose can be used. Left Hand Thread for Fuel Gas. Size: 3/8″ – 24 for 3/16″ ID
You save (%)
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 3/8″ -24 for 3/16″ID
You save (%)
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 9/16″ – 18 for 3/16″ ID
You save (%)
Long recognized for the clean, sharp surfaces they produce on tools, dies, blades, molds and almost any other metal piece requiring sharpening or smoothing.
You save (%)
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Swiss made screwdriver. Replacement blades sold here.
You save (%)
Mold can make three sizes of wire. Cast iron.
Wire sizes:
3/4″ x 5/16″ x 6-11/16″
3/8″ x 3/8″ x 6-11/16″
9/32″ x 5/16″ x 6-11/16″
You save (%)
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
You save (%)
Forms ingots or bullion of various sizes. Cast iron. Depth: 3-15/16″ 135 mm, Length: 1-3/4″ 45 mm, Width: 3/16″ 5 mm, Capacity: 200 dwt 310 g.
You save (%)
Forms ingots or bullion of various sizes. Cast iron. Depth: 35 mm, Length: 90 mm, Width: 35 mm, Capacity: 78 g.
You save (%)
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
You save (%)
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
You save (%)
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
You save (%)
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
You save (%)
Inner shaft for Grobet flexshaft C-300 and S-300.
You save (%)
Illuminated 1.75X magnifier provides hands free viewing. Adjustable arm provides light source quickly and efficiently to work area
You save (%)
Accurate, yet economical, scale weighs in 2 oz. increments. Easy to read red and black numerals on 4″ dial indicate weight, as well as water/investment ratios. Includes scoop. 10 pound capacity.
You save (%)
Plastic scoop for handling dry investment. Sold with investment scale, item #21.773.
You save (%)
Iron Binding Wire, 22 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
You save (%)
Iron Binding Wire, 27 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
You save (%)
Iron Binding Wire, 29 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
You save (%)
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
You save (%)
The 7700 is the basic unit and the biggest seller for a good reason. The 7700 is the crank up window of our soldering irons. The people that use them will use words like, dependable, bullet proof or easy battery change.
You save (%)
Produces an antique black finish on brass, bronze and copper.
You save (%)
Produces an antique brown/black finish on brass, bronze and copper.
You save (%)
Produces an antique Flemish, gray-black finish on brass, bronze and copper.
You save (%)
Produces a permanent, authentic, antique green finish on copper, brass and bronze.
You save (%)
Produces a dark, black antique finish on pewter, lead, brass, bronze, copper, nickel, tin-lead alloys and solders.
You save (%)
Produces a dark, black antique finish on silver and gold.
You save (%)
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
You save (%)
For wrapping silverware, jewelry and other gifts. Made of the finest quality white bleached tissue, which will not tarnish the merchandise. 20″ wide x 720″ long.
You save (%)
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
You save (%)
High-quality, well-balanced frames are strongly constructed with hardwood handles.
You save (%)
Jewelers Sawframe with End Screw, 2-1/2″ Depth
You save (%)
High-quality, well-balanced frames are strongly constructed with hardwood handles. Blades are firmly held by serrated lugs. The frames are adjustable to accommodate broken blades. You will get an accurate cut with our German-made saws. 3″ depth with end screw.
You save (%)
Jewelers Standard Sawframe, 5″ Depth, German Made.
You save (%)