Jewelry Tools
Browse Subcategories
Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.
Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. Pack of 5 – 2 Gram Tubes.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs.
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Designed for polishing small and difficult to reach areas. For use with a mandrel.
Diameter: 2″
Ply: 16
Stitching: 4 Rows
Sold by the dozen
Suitable for all purpose polishing and buffing. Pin hole centers.
Diameter: 4″
Thickness: 1/2″
Soft
Pink Hi-Shine
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Lightweight nylon black frame with soft PVC nosepiece. Molded-in side protection offers increased coverage for side impart. Adjustable temples lock into place.
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass.
20 Gram Bottle
Jewelry Shield’s specially patented formula lasts much longer than any other product or remedy available. One application lasts three months. 1/2 oz. bottle.
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Made of clear Lucite, our plier rack keeps tools off the bench and easy to find. Rack features holes for needle files, burs and other tools. Gives you more bench space and speeds up work because you spend less time looking for the right tool! Size: 10-1/2″ x 3-3/4″ x 4″
An acid based oxidizer which produces an instantaneous deep black patina on silver, gold, copper or bronze.
Used as a base for riveting, drilling and staking small parts, our hex anvil is case hardened and well polished for long life.
Our alphabet letters include the “&” sign to make a 27 piece set.
Our alphabet letters include the “&” sign to make a 27 piece set.
Our newest and best ring clamp offers the user greater reliability than other ring clamps.
Only 4 -100mm- long and a narrow .079 -2.0mm- thick this highly tempered opener allows the jeweler easy access to small prongs.
Special, high concentrate prevents scale, rust buildup, and mineral deposits inside steamer. Use this super-concentrated additive to help prolong the life of your steamer.
Made of clear lucite our plier rack keeps tools off the bench and easy to find. Rack is over ten inches long and features holes for needle files burs and other tools.
The new nylon jaw pliers by EURO TOOL are a necessity for the discerning jeweler.
Exceptional quality for outstanding value, this handy twelve piece, cut 2 needle file set includes one each: round, square, knife, half-round, oval, three-square, warding, equaling, barrette and crossing.
GemOro’s new generation of Eye Loupes features a high quality 10X, distortion free, bonded three piece lens made from optical glass, plus a built-in LED light source.
Perfect for every bench. Great sell for hobbyists! Set includes sizes 1.50mm-1.30mm-1.20mm-1.00mm-0.80mm-0.70mm-0.60mm
Part-catching groove on all four sides. Will not warp. Measures 9″W x 16″ L
Premium quality white aluminum oxide for dressing, truing, roughing and finishing diamond wheels.
Low-expansion borosilicate 3.3 glass. Designed to be heat-resistant and non-conductive. Heavy and uniform wall thickness. Easy pour spouts.
Top quality box joint construction – smooth, non-mar jaws. Brushed satin finish and double leaf spring return. Foam grip comfort handles. Overall length is 4-3/4″. Side cutter.
For setting or tightening the prongs on stone set rings. Jaws have been shaped so that they fit over the prongs on a setting. Overall length is 5″. Economical value.
When this powder is mixed with water or alcohol, it can be used to prevent the flow of solder to unwanted areas, such as a previously soldered joint or the moving parts of a catch.
Size: 1/2 lb. box
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use. Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
1″ Diameter 3/32″ Shank. Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use.
3/4″ Diameter 3/32″ Shank. Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use.
3/4″ Diameter 3/32″ Shank. Sold by the dozen.
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 9/64″ (3.25 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.5 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Green Wax, hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature 230°F (110°C). 1-1/16″ diameter.
Felt buff for use with the Vigor Multi-Grinder.
Diameter: 3″
Thickness: 1/2″
For use with 47.217
3/8″ Arbor Hole
Especially handy for bead stringers on the go! Cute to look at but extremely functional. Working head is constructed from the same size blanks as larger pliers.
A pickling compound for nickel, German silver, brass, bronze, copper, and imitation gold metals. 2 1/2 lb container.
Cross-locking, 6 1/2″ tweezers closes when released. Mounted on heavy-duty horseshoe base.
The points are precision ground and accurate to 0.10 millimeter with a 10mm capacity. Marked on both sides.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 9, 0.60mm.
Handy tool for holding rings to be filed or polished and for general ring work.
Deluxe version measures in European sizes circumference in millimeters American sizes and diameter in millimeters. It is also grooved for stone-set rings. Sizes 2 to 15.
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 4
Handles are knurled.
Overall Length: 7-3/4″ (200 mm)
Width: 15/64″ (5.9 mm)
Thickness: 3/32″ (2.2 mm)
Cut 0
We’ve improved our Allegro Diamond Tweezers by adding a thin layer of PVC coating to the tips for extra gripping power without damage to soft stones.
Self-stick, needs no moistening. Free marking pen included. 1000 pieces per package.