Jewelry Tools
Browse Subcategories
General use tweezers with sturdier points slightly wider and thicker tips than pattern No. 1. Indented and have flat edges for gripping object with tip or side. The plain finished points have a fine tip.
You save (%)
Telescoping hangers will extend 42″ above your workbench. Height adjustments are made easily with the thumbscrew.
You save (%)
Plain, hardened steel mandrel may be used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting.
You save (%)
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish.
You save (%)
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
You save (%)
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
You save (%)
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
You save (%)
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
You save (%)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
You save (%)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
You save (%)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
You save (%)
Slim design for better visibility. Pushing down on body releases striking mechanism, which can be adjusted for light or heavy strokes. Removable centering point can be interchanged with cup-shaped riveting point. Pocket clip included.
You save (%)
Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing.
You save (%)
The protective heat-holding cover makes this efficient for melting with a torch. Handy pouring openings. Made of fused silica with clay bond, for melting temperatures up to 2500°F (1371°C). Best choice for gold, silver, bronze, etc.
You save (%)
Plastic handle, 10-1/2″ long, holds strips of emery paper or cloth 11″ x 1″. Strips can easily be replaced. Supplied with 2 strips, grit 120 and 240.
You save (%)
Use these versatile wheels for watch bands or for light de-burring and polishing of non-ferrous metals. They replace hand pads and reduce the need for a finishing operation. Great for satin finishing of steel, and ideal for surface contaminant removal.
You save (%)
Slim line acrylic job envelope holder is 3 1/2″ x 11″. Comes with three dividers to keep your job orders separate.
You save (%)
This 6-1/4 jumbo version is made of thicker high grade tool steel for heavier cutting jobs. Excellent for small sprues it will cut up to 14 gauge -2.5mm- soft wire.
You save (%)
Used on platinum, gold, silver, and stainless steel watch bands and cases
You save (%)
Curved tips taper to 1/16″ for setting small stones. Box joint for alignment with built-in spring. Overall length is 4-1/2″.
You save (%)
Jaws taper to 1/32″ at tips and can be used to make bends and for gripping and manipulating wires. Overall length 6″, length of jaws 1-1/2″. Smooth jaws.
You save (%)
With fiber grips for heat resistance. Overall length 6-1/2 inches
You save (%)
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.
Length: 7″ (175 mm)
Width: 1/2″ ( 12.6 mm)
Thickness: 9/64″ (3.6 mm)
You save (%)
Extra Duty box-joint pliers feature double-leaf springs and red vinyl grips. Made in Germany of the finest European steel.
You save (%)
Serrated jaws for pulling wire. Made of forged steel with an ergonomic design.
on wire. One handle is formed to aid in pulling. Made of forged steel.
Length: 10″
You save (%)
The original EURO TOOL nylon jaw pliers are a must for straightening wire especially colored wire.
You save (%)
Screw Chuck-Brass-Left for Polishing Motors
You save (%)
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 32oz.
You save (%)
Avoid the high cost of prescription safety glasses. Save money over prescription safety glasses. Safety glasses and corrective lenses combined into one, for close-up work. These glasses compare to drug store “readers” while conforming to ANSI Z87.1 2003 specifications for high impact protection. Check with your Eye Doctor for the best diopter model for you.
You save (%)
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 6
You save (%)
High-quality polishing cloth. Soft, velvety, no-lint texture polishes surfaces without scratching. Use on jewelry, silverware, eyeglasses, cd’s. It will retain its softness and suppleness even after repeated washings. Measures 17″ x 14″
You save (%)
For alcohol, benzene or other solutions. Edges of covers and cups are ground to form a tight seal, keeping dust from entering and protecting solutions from evaporation.
You save (%)
Ideal for polishing concave surfaces on small objects. Made of solid felt with hard density. Use with tapered mandrel.
Diameter: 1/4″
Length: 1/2″
Sold by the Box of 25.
You save (%)
Economical, imported loupes with ground and polished lenses set in lightweight black plastic frames. Working distance is 4″ with 2 1/2″X power.
You save (%)