Jewelry Tools
Browse Subcategories
Handles are knurled.
Overall Length 4″ (100 mm)
Width 9/64″ (3.6 mm)
Thickness 3/64″ (1.1 mm)
Cut 2
Handles are knurled.
Overall Length: 7-1/4″ (200 mm)
Width: 1/4″ (6.4 mm)
Thickness: 1/16″ (1.6 mm)
Cut 2
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 13/64″ (5.1 mm)
Thickness: 3/64″ (1.3 mm)
Cut 4
Round knurled handles aid gripping. Used by mold makers, goldsmiths, gunsmiths, and musical instrument manufacturers for precise finishing on small surfaces.
Widely used in making and repairing extrusion dies.
Overall Length: 6-1/4″ (160 mm)
Width: 13/64″ (5.0 mm)
Thickness: 3/32″ (2.3 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64 (2.1 mm)
Cut 0
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 00
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 0
Handles are knurled.
Overall Length: 4″ (100 mm)
Width: 5/32″ (3.7 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
Warding files are parallel in thickness and tapered in width. Useful for removal of burs. Double cut top and bottom – Both edges are single cut.
Cut 2
Length: 4″ (100 mm)
Width: 31/64″ (12.5 mm)
Thickness: 3/64″ (1.0 mm)
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.
Length: 7″ (175 mm)
Width: 1/2″ ( 12.6 mm)
Thickness: 9/64″ (3.6 mm)
Three-Square files are gradually tapered, cut and workable to the point. Double cut on all three sides.
Length 8″ (200 mm)
Width 33/64″ (13.0 mm)
Cut 2
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
Metal: Titanium
Length: 4-1/2″
Point: Sharp
Serrated jaws for pulling wire. Made of forged steel with an ergonomic design.
on wire. One handle is formed to aid in pulling. Made of forged steel.
Length: 10″
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
Computes weight of diamond without removing stone from mounting. Width and depth are measured with caliper and compared with measurements in table. For round and fancy shapes.
The holes in the gauge are used to measure stones, while the extensions are used to measure mountings. One side shows millimeters, the other side shows the corresponding carat measurements.
High quality Dazor 3-Bulb bench lamp. Adjustable arm makes positioning easy anywhere on the bench. Clamps or bolts to your bench with ease.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
Sold by the box of 100.
Hi-Shine
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Hi-Shine
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge Square
Sold by the box of 20
Ideal for polishing concave surfaces on small objects. Made of solid felt with hard density. Use with tapered mandrel. Diameter: 1/4″ Length: 3/8″ Sold by the Box of 25.
All-purpose laboratory and industrial tong for holding, manipulating and pouring, as well as for picking up hot objects. With serrated tips. Stainless steel with long neck.
Length: 9″ (229 mm)
Foredom’s higher torque flex shaft model, the M.TX hang-up style motor, is teamed up with a TXR plastic housing foot pedal.
Two Year Limited Warranty on Motor and Control.
Edenta Alphaflex Silicone Polishing Wheel, Square Edge, 12pk
Edenta Alphaflex Disc Silicone Polisher, Sharp Edge -12pk
Edenta Alphaflex Bud Shaped Silcone Polisher, 12pk.
Edenta Alphaflex Silicone Polishing Wheel, Square Edge -12pk.
for polishing gold, amalgam and composites
Edenta Silicone Polishing Wheel, Square Edge. Alphaflex 0001. Made in Switzerland. Box of 100pcs
Made for precision work, our European model, miniature machined horn anvil is case hardened steel. Size: 1-1/4″ x 4-3/4″ Weight: 1-1/4lbs
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Wood handle with sharp pointed tip for placing, holding and positioning solder in just the right place. Gold & silver soldering with titanium tip.
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 3-1/2″ x 3-1/2″
Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 2-3/8″ x 1-7/8″
Cup-shaped cutters on wheels used to dress up a setting, ring mounting, or any piece of jewelry, by forming a decorative bead or fine row of cuts along the edge. Sets contain six sizes plus chuck-holding handle.
53.102 – Included in Set, Size #2
53.104 – Included in Set, Size #4
53.106 – Included in Set, Size #6
53.108 – Included in Set, Size #8
53.110 – Included in Set, Size 10
53.110 – Included in Set, Size 10
53.112 – Included in Set, Size 12
Holds all popular size pearls securely in position for drilling. Knurled locknuts provide quick clamping and releasing action.
Specially designed head with 5 star shape. Smooth ball bearing head with thick, knurled, non-slip body.