Jewelry Tools
Browse Subcategories
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
Slot holds emery paper so it can be wound around mandrel to desired thickness.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
You save (%)
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
You save (%)
The #120 grit is suited for small burrs and line removal.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
For use with light pressure at much less than 25,000 RPM maximum safe speed. 1/16″ holes for use with mandrel Nos. 43.124 or 43.154. Sold by box of 100.
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
7/8″ diameter, fine grit, aluminum oxide, brass center. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.
Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.
- Bright LED lights, 72 bulbs
- 5″ diameter lens
- 1 3/4x Magnification
Extra board for 135.0361, V-Slot Board and Clamp. Measures 7-1/2″ L x 2-1/2″ W.
Fits into slot in your work bench. Use as support when filing, sawing, setting, etc. Dimensions: 6-1/4″ x 2-1/4″
Fits into slot in your work bench. Use as support when filing, sawing, setting, etc. Dimensions 5-1/4″ x 2-1/8″
Lightweight nylon black frame. Clear protective sides. Adjustable temples.
Opens prongs without fracturing stones. The top jaw is a claw that grips the prong and the lower jaw is grooved to hold the prong.
Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape.
Versatile magnification glasses for professional jewelers and watchmakers.
Adjustable LED Light, 2-Bulbs. Five interchangeable lenses. Features1.0X, 1.5X, 2.0X, 2.5X and 3.0X magnification
The safety glasses are supplied in a handy carry case with a polishing cloth to clean the Optics and a convenient cord to hold your glasses around your neck. Magnification: 2.5X. Working Distance: 11″ – 15″. Field View: 3.75″
The replacement blades are hardened blue steel.
You save (%)
1″ diameter.
1/8″ arbor hole.
Sold in packs of 12 pieces.
Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 8-1/4″.
This introductory Wax Modeling Kit is perfect for beginners and students.
Our alphabet letters include the “&” sign to make a 27 piece set.
Our alphabet letters include the “&” sign to make a 27 piece set.
Absolutely the best Round Nose box-joint pliers available at this price or even several dollars more.
Absolutely the best flat nose box-joint pliers available at this price or even several dollars more.
Absolutely the best chain nose box-joint pliers available at this price or even several dollars more.
Part-catching groove on all four sides. Will not warp. Measures 9″W x 16″ L
Used for flattening and shaping. Polished round and flat horns. Measures 3 7/8″ from tip to tip across the horns and 2 5/8″ high.
Refills for Extra Thin Scratch Brush (BRS-290.00) are 4-1/4″ long and 12 per pack.
Pen-shaped, spring-loaded mechanism. Measures 43/4″ long with 1/16″ diameter fiberglass brush. Great for tight places and electronic applications. Made in Germany.
The original EURO TOOL nylon jaw pliers are a must for straightening wire especially colored wire.
The Micro Crimper is also an adaptation of the Original Crimper to be used with 1mm size crimps.
Now you can crimp any crimp bead of “medium” size (2mm-3mm) and various shapes quick and easy!
High-quality drills have straight shanks and are accurately ground then carefully tempered. Size: 0.0350 inches (0.889mm). Packed ten per box.
These tweezers have thin, spade-shaped tips which make it easy to pick up delicate objects, such as stamps. Overall length 4-1/2 inches (114 mm).
Excellent for handling diamonds, pearls and beads. Nickel-plated with chrome finish
Excellent for handling diamonds, pearls and beads. Non-reflective black finish
Nature’s Touch Citric Acid Pickle is a mild pickling solution used for silver, gold, brass and copper.
The retrieving forceps have blunt rounded serrated points. Drop-forged for extra durability, and ideal for use when steam cleaning or ultrasonic cleaning. The guide pin is not included on this model.
Closing pressure is easily adjusted with these slidelock tweezers. Blunt points.
With fiber grips for heat resistance. Overall length 6-1/2 inches
The “Original Ring Adjuster” Ring Snuggies provide a snug fit for a ring on any finger.
Kit includes inner shaft, pair of motor brushes, grease, and operation manual.
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
32-5/8″ long, standard material outer sheath comes equipped on ALL Flexades: S.B0-516, S.B0-14, S.B0-12, S.B0-38
This 33-1/2″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
F, JJ, JB.
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
The H.18 is for use with only 2.35mm (3/32″) shank burs.
H.15D has the same specs as the H.15, except includes a duplex spring for added flexibility.