Jewelry Tools

A safe non-toxic silicone based spray to release wax patterns from rubber molds. Non-flammable, non-CFC and environmentally safe.

A must for every watchmaker this movement holder clamps onto the edge of your bench. The holder is made of metal and will hold any size movement.

Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.

Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.

Replacement carbons.

For stirring gold in crucible while melting.

For stirring gold in crucible while melting.

Foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot.

Fill the cup in the center with wax or clay to form the base for the sprue.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

For drilling the holes for setting seed pearls and other round or half-round stones. 3/32″ shank.

For drilling the holes for setting seed pearls and other round or half-round stones. 3/32″ shank.

For drilling the holes for setting seed pearls and other round or half-round stones. 3/32″ shank.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.

Handy 5″W x 3″ D x 1″ H (127 x 76 x 25 mm) plastic bur holder helps keep 3/32″ (2.4 mm) shank burs in place, safe from loss or damage.

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.

Brush for Flex Shaft Motors. Sold in pairs.

Shaped for holding Burno style crucibles. Length 10-1/2 inches (267 mm).

Standard, fast-cutting brown tripoli, used when rouge will be used for final finish, medium box, 1lb

Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 13/4″ long. Sold by the dozen.

Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 13/4″ long. Sold by the dozen.

Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 13/4″ long. Sold by the dozen.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.

Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life. The lengths vary from approximately 1-3/4″ to over 7″, with diameters gauged slightly below largest portion of the cutting edges.

For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.

For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.

For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.

For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.

BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.

For cleaning, polishing and finishing. Made from natural rubber with graded pumice grain evenly distributed to assure uniform results. The light action produces a smooth finish on soft metals. Arbor hole is 1/16″.Sold by the box of 100.

Wire-Brass Binding 14 Gauge, 1/4-lb spool.

6″ lengths in assorted sizes from 14 to 21 by B&S gauge. Used to make pins, rivets, hinges, etc.

6″ lengths in assorted sizes from 20 to 70 by drill gauge.

Tweezers are very soft and non-magnetic
Include the following styles: #3, #5, AA, MM and AM
Come in a convenient storage pouch

Measures in inches and millimeters. Capacity 4″ or 100 mm.

Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 8-1/4″.

Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 7-1/4″.

For cleaning work before soldering. Brass wire bristles are approximately 1-3/4″ long and bound in metal holder.

Our scratch brushes with pen-shaped handles are used for removing rust or corrosion in hard to reach places. The brass model is excellent for cleaning clogged burs.

Well balanced handle is lightweight for just the right amount of spring.

Face Diameter: 1/2″ (13 mm)

Head Length: 2″ (51 mm)

Head Weight: 2 oz. (57 g)

Steel collet Is set into hollow brass handle with screw chuck. Capacity is 0 to .028″ (0 to .71mm), overall length 3-1/8″.

This 2 oz. hammer features a superb quality solid brass head threaded onto an anodized aluminum handle. A special compound is used to assure the head cannot release.

For 5 oz. (142 g) Mallet Head

For 2 1/2 oz. (71 g) Mallet Head