Jewelry Tools
Browse Subcategories
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
The opaque shellac sticks are used to set jewels and stones or to hold work temporarily. Heat to apply. Sticks are 7″ long.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing.
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair.
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair. Stainless steel, style H, length 3-1/2 inches (90mm).
Boley style tweezers are excellent general utility tweezers.
High-quality drills have straight shanks and are accurately ground then carefully tempered. Size: 0.0350 inches (0.889mm). Packed ten per box.
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5 1/4″. Smooth jaws.
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
Grobet USA Swiss Pattern Precision precision files. The standard for quality and performance! Also known as square handled needle files, these precision files are available in most of the needle file shapes.
These anvils have a flat smooth case hardened surface and can be used as a base for staking, riveting and drilling small parts.
Use brass on yellow metals such as copper and brass. Crimped wire is .003″ thick and produces a soft matte like finish.
Contains the five most used compounds: red rouge, yellow rouge, brown tripoli, plastic rouge and emery. All in peel-back cardboard tubes.
Made of stainless steel with stainless steel fine mesh our economical baskets offer the user a size for every need. Dimensions: 8 x 4 x 3-1/2.
The GemOro 0752 UltraDock Charging Station can be used to cradle and charge GemOro testers when not in use.
Measuring range 0-150mm digital caliper. Stainless Steel. Convenient plastic box case. Millimeter or inch readings. Easy on/off button.
Horotec Carbon Tip Tweezers, Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
Made of hardwood this block is used to shape metal without marring. Each depression is 3/4″ deep with a gentle slope. The diameters include: 4″, 3-1/2″, 3″, and 2-1/2″.
This new Bracelet Bench Block is the ideal size for working on bracelets and other large pieces.
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
This clamp holds a ring externally which allows the user to file, grind or polish the inside.
High-quality, well-balanced frames are strongly constructed with hardwood handles. Blades are firmly held by serrated lugs. The frames are adjustable to accommodate broken blades. You will get an accurate cut with our German-made saws. 3″ depth with end screw.
Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.
Our steel square forming mandrel is great for use when a square corner is needed to bend wire or sheet. Overall length is 12″ with a taper from 6mm – 18mm. Mandrels have a threaded end to accommodate the included square threaded rod allowing use in a vise or hole in bench keeping both hands […]
Our steel square forming mandrel is great for use when a square corner is needed to bend wire or sheet. This mandrel has clipped square corners for more of a rounded square corner. Overall length is 12″ with a taper from 6mm – 18mm. Mandrels have a threaded end to accommodate the included square threaded […]
This durable all stainless steel basket may be placed in a 2 quart ultrasonic while suspending jewelry within the ultrasonic tank to allow it to be cleaned without burning fingers or allowing the jewelry to rest on the bottom of the tank possibly causing damage to the transducers.
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 5/8″ (16 mm)
Head Length: 2 5/8″ (67 mm)
Head Weight: 5 oz. (142 g)
Contains 8 oz. (227 g) in lump form. When dissolved in hot water, can be used to oxidize most metals.
Kit includes inner shaft, pair of motor brushes, grease, and operation manual.
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Made for precision work, our European model, miniature machined horn anvil is case hardened steel. Size: 1-1/4″ x 4-3/4″ Weight: 1-1/4lbs
Grobet Swiss-style. Revolutionary designed, perfectly balanced sawframe. Ergonomic handle reduces fatigue and provides greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use.
For wrapping silverware, jewelry and other gifts. Made of the finest quality white bleached tissue, which will not tarnish the merchandise. Comes in a 7 3/8″ roll.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair. Stainless steel, style H, length 3-1/2 inches (90mm).
Asco Swiss Made loupe. Type H, 7x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 3.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 3x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 2.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Specialized screwdriver with a hexagon head. Smooth ball bearing head with thick, knurled, non-slip body.