Jewelry Tools
Browse Subcategories
For alcohol, benzene or other solutions. Edges of covers and cups are ground to form a tight seal, keeping dust from entering and protecting solutions from evaporation.
The satin soft touch provides a comfortable non-slip grip. These tweezers provide symmetry and balance for all normal applications – shaping, adjusting, and finishing.
Dumont Diamond tweezers have finely serrated jaws to hold stones and small objects firmly. They’re simply the best stone tweezers in the world!
Similar to pattern No. 4, except have very narrow needle-like points. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Very Sharp
Finger Pro is the ultimate finger protection from cuts burns and abrasions.
Four quality pliers in an attractive wood stand- keeps your bench organized and protects the pliers! Plier types included: Chain nose, Flat, Round and Sidecutter(semi-flush).
Use these sturdy shears for cutting soft wire up to 16 ga. thick and sheet up to 20 ga. thick. Sharp blades (57–59 HRC) leave a very clean edge.
Scissor handle shears are great for cutting heavier metals and copper plate up to B & S gauge #20. This narrow blade model has large loop handles that are extra comfortable.
A preparation that removes scratches, smooths and cleans wax patterns prior to casting.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
Use to obtain matte finishes on metal, wood and plastic. Nylon fibers impregnated with abrasive granules. Diameter: 3″ – Thickness: 3/4″ – Arbor Hole: 1/4″ -Fine
Metal: Non-Magnetic Stainless Steel, Length: 4-3/4″, Point: Sharp
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Barrette files are tapered in width and thickness, coming to a point. Only flat side is cut, providing safe edge and top. Double cut.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Primarily used to form bezels, these mandrels are also used to shape decorative ornaments, make chain links, etc. Made of hardened and tempered steel.
Sturdy full size pliers have box joint for smooth operation. Have leaf spring and cushion grips for comfort. Overall length is 5-1/4″.
Exceptionally dense, chemically treated felt. Suitable for forming smooth, flat surfaces with sharp corners.
Diameter: 6″
Thickness: 1/4″
Hole: 1/2″
Forms ingots or bullion of various sizes. Cast iron. Depth: 3-15/16″ 135 mm, Length: 1-3/4″ 45 mm, Width: 3/16″ 5 mm, Capacity: 200 dwt 310 g.
Artifex Abrasive Wheel Fine, SC46WP. 100mm x 10mm x 6mm Hole. Made in Germany.
Artifex Abrasive Wheel Extra Fine, SC400MP. Grit 400, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany.
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
Ideally suited for handling microscopic parts. Shanks are indented with beveled edges and points that have been extra-honed to a needle-like shape and sharpness. Overall length 4-1/2″.
Artifex Abrasive Wheel Fine, SC46WP. 100mm x 20mm x 6mm Hole. Made in Germany.
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
Made of the highest quality optical glass, this OptiVISOR® 1.5X (#2) lens plate has a 20″ focal length.
Crucible for use with the centrifugal casting machines. Made of fused silica with a clay bond, which will last through many meltings. Best choice for metal melting up to 2500°F (1371°C).
Mold can make three sizes of wire. Cast iron.
Wire sizes:
3/4″ x 5/16″ x 6-11/16″
3/8″ x 3/8″ x 6-11/16″
9/32″ x 5/16″ x 6-11/16″
One smooth jaw is half-round and the other is flat. Overall length 5-1/4″, width of jaw 1/4″.
Grinding Wheel, 3″ x 1/2″, Medium Grit, Silicon Carbide, 1/4″ Arbor Hole. The rating on these wheels is not to exceed 8500 RPM.
for polishing gold, amalgam and composites
Edenta Alphaflex Silicone Polishing Wheel, Square Edge -12pk.
Edenta Alphaflex Bud Shaped Silcone Polisher, 12pk.
Edenta Alphaflex Disc Silicone Polisher, Sharp Edge -12pk
Edenta Alphaflex Silicone Polishing Wheel, Square Edge, 12pk
Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the point. Used primarily for filing interior curved surfaces. The double radius makes possible the filing at the junction of two curved surfaces or a straight and a curved surface. Double cut on both sides.
Length: 6″ (150 mm)
Width: 5/8″ (16.0 mm)
Thickness: 11/64″ (4.5 mm)
Cut 2
SELVYT and SELVYT-SR polishing gloves
Knitted cuff. Without strand deposit on pieces to be polished. Can be washed several times.
Provides a square vise-like grip. Light, flat nose, Smooth, Slot “V”, Overall length 5″.
Precitec Flat nose Pliers w/Nylon Jaws. 135mm long.
Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4″ wide sanding belt.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Crucible for use with the centrifugal casting machines. Made of fused silica with a clay bond, which will last through many meltings. Best choice for metal melting up to 2500°F (1371°C).
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.