Jewelry Tools

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 5/64″ (2.0 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 5/32″ (4.0 mm)

Thickness: 3/64″ (1.3 mm)

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 5/32″ (4.0 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Handles are knurled.

Overall Length 6-1/4″ (160 mm)

Width 7/32″ (5.5 mm)

Thickness 1/16″ (1.4 mm)

Cut 2

BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.