Watch Movement Tools
Swiss made slide locking jaws are specially designed to hold barrel arbors. 1.00mm diameter opening.
Plastic movement holder for positioning hands and checking the chronograph function of and ETA/Valjoux 7750 movement.
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.
For use with ETA calibers: 2892A2, 2893-1-2-3, 2894-2, 2895-2, 2896, 2897.
Bergeon 31081 Screwdriver to Remove Etachron Pitons
Oscillating Weight Axle Punch for Rolex 3035/3135
Oscillating Weight Axle Punch for Rolex 2030/2035
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
Reversible case cushion in anti scratch synthetic material.
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
The newest in innovative watch analyzers now offered by EURO TOOL allows users to tell whether the step motor is working or if the battery is dead without opening the watch.
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
ETA 2892A2/2824-2 Movement Holder Movement Holder for watch repair. Clear Acrylic.
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
The Freedom automatic small parts cleaner. Five cleaning/rinsing stations, all ultrasonic, and thousands of dollars less expensive than the competition. The Freedom allows the watchmaker the “freedom” to do other tasks while the machine is automatically cycling. Made in the USA.
Bergeon 7100 Movement Holder – specifically for ETA 2894-2. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
Oscillating Weight Axle Punch for Rolex 2130/2135
Bergeon 7100 Movement Holder – specifically for ETA 7750 series. Will also work with Sellita SW500. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Oscillating Weight Axle Punch for Rolex 1530/1570
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
3 oil holding cups and 3 dip oiler holders. Heavy-duty steel construction with rubber non-slip base.
Generic Micro Stella regulator for all Omega Co-Axial 3303/3313
Set of three tools for assembling and dismantling “Kif Trior” shock-absorbers. Supplied with 3 tubes of 5 springs of one type. Swiss Made.
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
Just squeeze and you’ll get the right amount of lightweight oil with rust inhibitors. Plastic spout extension available which enables you to get to those hard-to-reach places.
Compact but very accurate this unit tests watch calculator and camera batteries as well as lithium and mercury cells. Priced right and the quality is assured.
Die-cast sturdy oiler -4 cups
Brushed / sanded finish
Replaceable felt pad located in center of oilers
Swiss made
Plastic movement holder for positioning hands and checking the chronograph function.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Plastic Movement Holders, Set of 12
7-1/2 to 22-1/2 Lignes
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Reversible brass holder will take all shapes and sizes up to 12 1/2″ lignes.
18-24 sticks per bundle, depending on diameter.
Stick Length: 7″
Diameter: 6.0mm
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.80 1.00
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
Bergeon oscillating weight remover for ETA Calibers 2891-2895, 7750, and 2000-1. Tips store in handle.