Watch Tools
Browse Subcategories
Cross-locking, 6 1/2″ tweezers closes when released. Mounted on heavy-duty horseshoe base.
Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.
Will fit whell sizes up to those listed. No. 43.158 is ideal for use with rubberized abrasives. Sold by dozen.
Wheel Diameter: 1″
Wheel Thickness: 1/4″
Hole Size: 1/16″
Ideal for use with rubberized abrasives. Sold by dozen.
For use with wheels having 1/16″ arbor holes. Sold by dozen.
With brass collar. Used with rubber points. Sold by dozen.
Popular for use with rubberized abrasives. Sold by dozen.
Quickly reshapes and resurfaces abrasive stones to like-new condition. A very hard and coarse silicon carbide stone with 4 different sized half-round grooves on one side measuring 1/16″, 1/8″, 3/16″, and 1/4″. Stone itself measures: 3-1/2″ x 1-3/8″ x 9/16″
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
Now available in a high-impact, plastic gray color with more slots, including one which is extra wide for larger bracelets. Allows the repairer to tap out pins or take out and replace screws easily. Take the struggle out of band sizing. 2″ x 2-1/2″ x 1″.
The EURO TOOL bracelet holder is made from the perfect medium because wood will not scratch precious metals.
Double End Replacement Tip for Japanese Spring Bar Tool
Replacement blade for the Gucci screw removing tool (SKU# 750.0204). Sold by the piece.
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.
Excellent performing pliers with extremely precise jaw alignment. Joint movement is highly stable and smooth which means extra precision even at the extreme tip of the jaws. Double-leaf springs with high-impact cushion grips. Overall length: 120mm (4.72″) Jaws: Flat Nose, Smooth Jaw Length: 20mm (0.79″) Tip Width: 3.2mm (0.13″)
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
Metal: Titanium
Length: 4-1/2″
Point: Sharp
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
High quality Dazor 3-Bulb bench lamp. Adjustable arm makes positioning easy anywhere on the bench. Clamps or bolts to your bench with ease.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
Casing cushion with a chromed metallic ring. 75mm in diameter.
Bestfit Springbar Removing Tool. Includes fine point and forked tip.
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
Specially designed head with 5 star shape. Smooth ball bearing head with thick, knurled, non-slip body.
Specialized screwdriver with a hexagon head. Smooth ball bearing head with thick, knurled, non-slip body.
Taps for 5.3mm and 6.0mm Rolex case tubes. Use these to clean up or re-align the threads of Rolex case tubes. ***McCaw Co is independent of and not affiliated with or sponsored by Rolex® Watch U.S.A. Inc. Rolex® warranty does not apply to non-genuine parts supplied by McCaw Co***
1001C Double Shoulder Curved Spring Bar Assortment. Seven different sizes, 100 pieces each, 700 pc. total. Sizes included: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16″.
High quality full stainless steel tool to assemble And disassemble Rolex bands. 3 piece set.
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
Double Motor hanger with bench clamp mount features 3-pc hexagonal support rod and safety hook rod for holding one or two motors. (Motors not included)
With a combination wood and metal frame, this inexpensive cutter is perfect for 7-3/8″ gift wrap rolls. Features holes in the base which allow it to be screwed permanently to table or bench top. 2-1/4 lbs.