Watch Tools
Browse Subcategories
Cross-locking, 6 1/2″ tweezers closes when released. Mounted on heavy-duty horseshoe base.
Made of clear lucite our plier rack keeps tools off the bench and easy to find. Rack is over ten inches long and features holes for needle files burs and other tools.
Special, high concentrate prevents scale, rust buildup, and mineral deposits inside steamer. Use this super-concentrated additive to help prolong the life of your steamer.
Used as a base for riveting, drilling and staking small parts, our hex anvil is case hardened and well polished for long life.
ETA/Valjoux 7750 Series Plastic Movement Holder
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Jewelry Shield’s specially patented formula lasts much longer than any other product or remedy available. One application lasts three months. 1/2 oz. bottle.
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
Lightweight nylon black frame with soft PVC nosepiece. Molded-in side protection offers increased coverage for side impart. Adjustable temples lock into place.
Snap those stubborn pins out in a hurry with this clever device.
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
Metal: Non-Magnetic Stainless Steel
Length: 4-1/2″
Point: Sharp
Replacement flat head tip for the screwdriver that removes oyster and jubilee bracelet link screws on Rolex® watches. 1.3mm Flat head tip fits Rolex® bracelet screws. OEM blade and tip sized to match the Rolex® Tool 2100. Tips are held in place with a set screw
Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.
With brass collar. Used with rubber points. Sold by dozen.
Metal: Stainless Steel, Length: 4-3/4″, Point: Sharp
This vise with 2 inch jaws offers a choice of clamping or screwing onto the bench. An excellent value and a necessity for every bench.
Easy-to-use, economical watch strap hole punch for professional watchmakers.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Wheel Diameter: 1″
Wheel Thickness: 1/4″
Hole Size: 1/16″
Ideal for use with rubberized abrasives. Sold by dozen.
Oilers Swiss Dip Style Set x4. Includes Red, Black, Blue & Green.
Pen-shaped, spring-loaded mechanism. Measures 43/4″ long with 1/16″ diameter fiberglass brush. Great for tight places and electronic applications. Made in Germany.
Simple yet perhaps the most effective drain trap available. The stainless steel rim and screen are heavy enough to stay put and the fine mesh catches the smallest of stones or particles.
Our HANDY BLOCK is a 4-1/2″ x 6″ block of cured hardwood with 88 holes for organizing burs, needle files, beaders, mini brushes, etc.
This link pin remover set comes complete with 10 pins in sizes: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.50 and 2.00mm.
Adds 2 1/2X to the magnification. Easily attaches to either eye of optivisor. Swings away when not in use.
Ideal for transporting your watch, glasses or other fragile items.
This is the replacement blade for the Right Handed Bergeon Case Opener Tool 6987.
Rubber ball to open and close all types of screw on case backs. Inexpensive, easy-to-use this case opener allows most watches to be opened and will not leave marks. Diameter is 2.6″ or 67mm.
Fiber tips will not mar the dial. Sturdy jaws retract when side springs are pressed. Center plunger holds the hands firmly.
Strengthened Polyimide stick, can be used in the place of traditional pegwood. One end is pointed, the other end is flat.
This magnifier measures only 4″ long and features a 30mm 30X magnification lens. It also features a toggle switch to go between LED an UV light, and an on/off switch for illuminating. 2 CR2016 batteries included. Comes with small protective pouch.
ETA 2892A2/2824-2 Movement Holder Movement Holder for watch repair. Clear Acrylic.
Essential for removing pins from metal link bands. Made of Keltec II glass-filled nylon this unit includes two extra spacers to accommodate all bracelet sizes and two extra push pins. The pusher pin is hardened tool steel. We guarantee years of satisfaction with this tool which will not scratch or mar gold or silver.
Spring action holds screwdriver firmly in place. Steel wheels are carefully set into body to provide even action when wheeled over stone. Overall width is 19/16″ (40mm).
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 60 mm, thickness 0.08 mm.
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.
High quality extra fine diamantine powder produces a final high luster on parts and tools.
Polished hardwood stand (for set of seven screwdrivers, numbers 3 to 9 for baguette and pocket sizes) with carborundum sharpening stone built into base and a side compartment for spare blades. Designed especially for watchmakers. Nickel-plated to prevent rust.
The Bench Pin Saw Vise is the perfect tool for holding metal wood or plastic for easy sawing. A necessity for the jeweler’s bench as well as for the hobbyist or craft person. Fits in standard bench slot or clamps on table.
This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
This special die set made of high-impact nylon is excellent for revolving bezels on Rolex and other fine watches. You will find this set of dies to be an enhancement and work excellent with the CRY-905.00.
Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm
Trays are round at the base and will hold up to an 18 size movement plate. Interlocking design allows the trays to be stackable. Each tray measures approximately 3″ x 3/4″ (76 x 19 mm).