Watch Tools
Browse Subcategories
Artifex Abrasive Wheel Medium hardness & grain, SC150MP, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany. Perfect for polishing cases, specifically high end brands such as Rolex.
You save (%)
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
You save (%)
Made of the highest quality optical glass, this OptiVISOR® 3.5X (#10) lens plate has a 4″ focal length.
You save (%)
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
You save (%)
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
You save (%)
Artifex Abrasive Wheel Fine, SC80WP. Grit 80, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany.
You save (%)
HSS Tap For Screw Pushers, Ø 2.50 x 0.25 mm
You save (%)
HSS Tap For Screw Pushers, Ø 2.50 x 0.20 mm
You save (%)
Artifex Abrasive Wheel Fine, SC80WP. Grit 80, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany.
You save (%)
Oil cup in green anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
You save (%)
Oil cup in yellow anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
You save (%)
Oil cup in blue anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
You save (%)
Oil cup in red anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
You save (%)
Self adhesive. Stops tools rolling on the work bench.
You save (%)
Melts solder in 90 seconds. Perfect for fine jewelry work.
You save (%)
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
You save (%)
Artifex Abrasive Wheel Fine, SC46WP. 100mm x 20mm x 6mm Hole. Made in Germany.
You save (%)
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
You save (%)
Artifex Abrasive Wheel Extra Fine, SC400MP. Grit 400, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany.
You save (%)
Artifex Abrasive Wheel Fine, SC46WP. 100mm x 10mm x 6mm Hole. Made in Germany.
You save (%)
Metal: Non-Magnetic Stainless Steel, Length: 4-3/4″, Point: Sharp
You save (%)
“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.
You save (%)
This steel tool is used to install the Rolex® screw on pushers into a Rolex® watch case. McCaw Co. is independent of and not affiliated with or sponsored by Rolex®. Warranty does not apply to non-genuine parts supplied by McCaw Co.
You save (%)
Loupe holder that is designed to clip onto glasses. Coated wire frame won’t scratch the loupe. Replaces Bergeon 5913-R.
You save (%)
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
You save (%)
Remover for screw type case backs. This model is popular with many watchmakers offering a large surface for grasping and adjustable claws.
You save (%)
Spare pin set for L-G Master Case Opener – CWR-600.00
You save (%)
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
You save (%)
Replacement Tip for Horotec Case Opener MSA07.115 – 2mm
You save (%)
Swiss-made Gucci Screw Removing Tool is perfect for removing bracelet screws from Gucci and other high fashion watches.
You save (%)
Similar to pattern No. 4, except have very narrow needle-like points. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Very Sharp
You save (%)
The hardwood stand offers just the right degree of angle to make seeing and choosing the correct screwdriver as easy as possible.
You save (%)
Bergeon 7026 #3C Style Swiss Made Tweezers. Length 110mm.
You save (%)
Reversible brass holder will take all shapes and sizes up to 12 1/2″ lignes.
You save (%)
1 tool with black handle including: 1 end piece in grey PVC with a hole of ∅ 1.50 mm. 1 end piece in red PVC with a hole of ∅ 0.80 mm. Tips are replaceable.
You save (%)
Two light sources in one loupe! Use this Triplet 10X Lighted Loupe in low light environment or when extra light is desired.
You save (%)
Bergeon loupe with new innovative design of a sight opening, provides better visibility and prevents condensation. Also has a screw on bezel so lens can be removed for cleaning. Available in black or white and multiple powers.
You save (%)
Similar to pattern No. 4, except have very narrow needle-like points.
You save (%)
Stainless steel, style 00, length 4-1/2 inches (115mm).
You save (%)
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
You save (%)
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
You save (%)
Features a miniature pin vise and 12 tiny broaches made of high carbon cutting steel.
Broaches are five-sided for enlarging holes and range from .05 – .55mm.
Made in Germany.
You save (%)
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
You save (%)
With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not accessible with regular hand vise. Width of jaws 1/2″, overall length 4-3/4″.
You save (%)
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair.
You save (%)