Watch Tools
Browse Subcategories
Moebius 8040 clock oil is designed for use on large clocks, like tower clocks, and small machines with similar movements and mechanics.
Classic watch oil for general use on mechanical watches. 10ml bottle.
With a revolutionary micro fiber that will not snag or shed it is the optimal texture and softness for cleaning film from precious stones especially diamonds.
This magnifier measures only 4″ long and features a 30mm 30X magnification lens. It also features a toggle switch to go between LED an UV light, and an on/off switch for illuminating. 2 CR2016 batteries included. Comes with small protective pouch.
One ounce of concentrated granules is mixed with one gallon of water to form a fast-acting solution.
One ounce of concentrated granules is mixed with one gallon of water to form a fast-acting solution.
Special, high concentrate prevents scale, rust buildup, and mineral deposits inside steamer. Use this super-concentrated additive to help prolong the life of your steamer.
Cover all your bases with this 7 piece Luxor polishing compound set. From pre-polishing to final high shine luster, this set has it all. Use with felt or cotton buffs.
With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not accessible with regular hand vise. Width of jaws 1/2″, overall length 4-3/4″.
The Freedom automatic small parts cleaner. Five cleaning/rinsing stations, all ultrasonic, and thousands of dollars less expensive than the competition. The Freedom allows the watchmaker the “freedom” to do other tasks while the machine is automatically cycling. Made in the USA.
Fast and easy way to remove link pins.
It comes with 0.8 mm & 1.0 mm mounted punch points.
This link pin remover set comes complete with 10 pins in sizes: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.50 and 2.00mm.
- Overall length: 120mm (4.72″)
- Jaws: Round Nose, Very Fine
- Jaw length: 20mm (0.79″)
- Tip width: 0.7mm
Excellent performing pliers with extremely precise jaw alignment. Joint movement is highly stable and smooth which means extra precision even at the extreme tip of the jaws. Double-leaf springs with high-impact cushion grips. Overall length: 120mm (4.72″) Jaws: Flat Nose, Smooth Jaw Length: 20mm (0.79″) Tip Width: 3.2mm (0.13″)
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
Two light sources in one loupe! Use this Triplet 10X Lighted Loupe in low light environment or when extra light is desired.
- Bright LED lights, 72 bulbs
- 5″ diameter lens
- 1 3/4x Magnification
Versatile magnification glasses for professional jewelers and watchmakers.
Adjustable LED Light, 2-Bulbs. Five interchangeable lenses. Features1.0X, 1.5X, 2.0X, 2.5X and 3.0X magnification
Three interchangeable lenses
Three magnifications, 2.5x, 5x, and 16x
Protect your fingers and hands when polishing, finishing, or using solutions. Medium size will fit either hand. Sold by box of 100.
We have had many calls for larger snap-on nylon dies to fit our CRY-905.00. This set is designed for larger oversized watches that are very popular, and most have snap-on case backs.
Opens all sizes and shapes of waterproof cases. Comes with four sets of pins for case backs with notches holes knurled or polygon.
The six tempered rings are precision-made to interlock so they will not slip. The sturdy cast frame fits into your bench vise and the small bar gives you the torque you need for stubborn case backs.
For holding and tying knots. Length 4-1/4 inches (108 mm). Metal: Stainless Steel, Point: Very Sharp
Stainless steel metal handle used for cutting open rubber molds. Holds surgically sharp blades that snap on and are easy to change so that you always have a sharp blade.
Set of three tools for assembling and dismantling “Kif Trior” shock-absorbers. Supplied with 3 tubes of 5 springs of one type. Swiss Made.
25 Piece Set : 24 Nylon, Non-Mar Dies! Straight Wall, Flat & Rectangular Dies. Up to 60mm!
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.
Big watches are popular! This new version of the original Jaxa style case wrench now accommodates larger size watches up to 55mm diameter.
This popular model is called “Japanese” because it originated in Japan and features a special shaped fork tip. Many people prefer this shape for getting under straps and bands. Anodized aluminum body with hardened tool steel double-ended tip. Length: 5-1/4″ (135mm).
The 7700 is the basic unit and the biggest seller for a good reason. The 7700 is the crank up window of our soldering irons. The people that use them will use words like, dependable, bullet proof or easy battery change.
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
Illuminated 1.75X magnifier provides hands free viewing. Adjustable arm provides light source quickly and efficiently to work area
Inner Bezel Fitting Die for Rolex. Used in newer sapphire cases. 32.00mm interior opening.
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Swiss made screwdriver. Replacement blades sold here.
High quality, stainless steel dies are machined perfectly to fit the Breitling® cases.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.
Small tool for bracelet screws.
– 3 blades Ø 1.00, 1.40 and 3.00 mm
– Metal anti-skid base.
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns