Watch Tools
Browse Subcategories
ETA 2892A2/2824-2 Movement Holder Movement Holder for watch repair. Clear Acrylic.
Essential for removing pins from metal link bands. Made of Keltec II glass-filled nylon this unit includes two extra spacers to accommodate all bracelet sizes and two extra push pins. The pusher pin is hardened tool steel. We guarantee years of satisfaction with this tool which will not scratch or mar gold or silver.
Spring action holds screwdriver firmly in place. Steel wheels are carefully set into body to provide even action when wheeled over stone. Overall width is 19/16″ (40mm).
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 60 mm, thickness 0.08 mm.
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.
Polished hardwood stand (for set of seven screwdrivers, numbers 3 to 9 for baguette and pocket sizes) with carborundum sharpening stone built into base and a side compartment for spare blades. Designed especially for watchmakers. Nickel-plated to prevent rust.
The Bench Pin Saw Vise is the perfect tool for holding metal wood or plastic for easy sawing. A necessity for the jeweler’s bench as well as for the hobbyist or craft person. Fits in standard bench slot or clamps on table.
This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
This special die set made of high-impact nylon is excellent for revolving bezels on Rolex and other fine watches. You will find this set of dies to be an enhancement and work excellent with the CRY-905.00.
Trays are round at the base and will hold up to an 18 size movement plate. Interlocking design allows the trays to be stackable. Each tray measures approximately 3″ x 3/4″ (76 x 19 mm).
This rack features a 7-1/2″ bar area for easy accessibility to your favorite pliers. Two “tray extensions”, each with two round depressions, for holding small parts or bits of solder.
Vigor Super Glue sets in 45 to 60 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. No-drip, precision applicator allows for glue to be dispensed one drop at a time. Pack of 5 – 2 Gram Tubes
A safe and easy way to remove unbreakable watch crystals without dismantling the watch. The jaws open from 12 to 37mm and are designed for both ladies’ and gents’ watches.
We have had many calls for larger snap-on nylon dies to fit our CRY-905.00. This set is designed for larger oversized watches that are very popular, and most have snap-on case backs.
Bergeon Luminous Paste Varnish – refill for BG5680. Mix with luminous powder and thinner.
Calypso Waterproofing Machine – Cylinder Gasket – 70mm. Round O ring gasket for between cover and cylinder. 70mm in diameter.
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
With fiber grips for heat resistance. Overall length 6-1/2 inches
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
6″ lengths in assorted sizes from 20 to 70 by drill gauge. Packed in plastic tubes.
18-24 sticks per bundle, depending on diameter.
Stick Length: 7″
Diameter: 6.0mm
Made in Germany, this plier is the best quality pin remover on the market. The round nose fits snugly into the recessed pin to snap it out cleanly. Length 5″ (125mm).
Use the basket with your Gemoro ultrasonic cleaner to suspend your jewelry piece within the ultrasonic tank while it’s cleaning.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Bracelet links remover plier. Comfortable rubber handle for easy grip. Length: 135 mm.
Hold watch straps in place while repairing or changing a battery without having to remove the band. Comes with a nylon die that will not mar or scratch crystals.
Replacement Peek tips for Horotec tweezers MSA12.764. 1 pair.
Different size steel collets are mounted in both ends of hollow handle. Capacity 0 to .099″ (0 to 2.5 mm), overall length 4-1/4″
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
Medium-duty bench knife features a slim 1-3/4″ blade set firmly in hardwood handle. Overall length 5″.
Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
The drum allows increased screwing force. Sizes available: Ø 1.00 – 1.20 – 1.40 – 1.60 – 1.80 mm.
Replacement Peek tips for Horotec tweezers MSA12.765. 1 pair.
Versatile magnification glasses for professional jewelers and watchmakers.
Adjustable LED Light, 2-Bulbs. Five interchangeable lenses. Features1.0X, 1.5X, 2.0X, 2.5X and 3.0X magnification
Bergeon loupe with new innovative design of a sight opening, provides better visibility and prevents condensation. Also has a screw on bezel so lens can be removed for cleaning. Available in black or white and multiple powers.