Watch Tools
Browse Subcategories
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 5, 1.20mm.
Sturdy, quick acting tool for removing all types of hands from watches and instruments. Hands are removed by pushing downward on the plunger-type handle. Center post acts as a guide and holds hands after removal.
Metal: Stainless Steel
Length: 4-1/2″
Point: Sharp
Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.
For use with wheels having 1/16″ arbor holes. Sold by dozen.
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
Now available in a high-impact, plastic gray color with more slots, including one which is extra wide for larger bracelets. Allows the repairer to tap out pins or take out and replace screws easily. Take the struggle out of band sizing. 2″ x 2-1/2″ x 1″.
- Overall length: 120mm (4.72″)
- Jaws: Round Nose, Very Fine
- Jaw length: 20mm (0.79″)
- Tip width: 0.7mm
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
One jaw is half-round and the other is round. Overall length is 5-1/2″.
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
This is the replacement blade for the Right Handed Bergeon Case Opener Tool 6987.
5 Delrin® Screw-on Reversible Dies for Fitting Large Case Bezels
The Freedom automatic small parts cleaner. Five cleaning/rinsing stations, all ultrasonic, and thousands of dollars less expensive than the competition. The Freedom allows the watchmaker the “freedom” to do other tasks while the machine is automatically cycling. Made in the USA.
3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Bergeon 7100 Movement Holder – specifically for ETA 2894-2. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Assortment of 24 burs for jewelers In tool steel. Fine cut. First quality. Shank: Ø 2.35 mm. Total length: 44.5 mm. Burs Ø 3 – 4- 6 mm.
Color coded watch oiler and matching oil cup. Handy item for any watchmaker or aspiring watchmaker. Oil cup is 1 1/4″ in diameter and houses a glass reservoir to hold the oil. Oiler measures 2 1/4″ in length, including the plastic handle and steel tip.
Color coded watch oiler and matching oil cup. Handy item for any watchmaker or aspiring watchmaker. Oil cup is 1 1/4″ in diameter and houses a glass reservoir to hold the oil. Oiler measures 2 1/4″ in length, including the plastic handle and steel tip.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Bergeon 7026 #3C Style Swiss Made Tweezers. Length 110mm.
Made of the highest quality optical glass, this OptiVISOR® 2.5X (#5) lens plate has a 8″ focal length.
Drop injection oiler. For train wheel pivots, cup bearings, everywhere the oiler has to be positioned before depositing oil.
Drop deposit oiler. For pallets, mechanical parts, oiling spots difficult to reach.
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
For opening and closing screw backs and bezels. Has two cup sizes for 0 to 18s watches.
Oscillating Weight Axle Punch for Rolex 2130/2135
Bergeon 7100 Movement Holder – specifically for ETA 7750 series. Will also work with Sellita SW500. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
Focus Ring provides a wide range of measurement applications Accurately measures diameter, angle, hole size, thread measurement, radii, thickness, etc.
The GEM-ZOOM™ camera attachment provides crisp, clear pictures and videos of gemstones, diamonds, and jewelry. Its compact size and simplicity offer portability and versatility. Cool or warm light can be selected by pressing the appropriate lamp button.
The innovative design enables the user to raise, lower, or tilt, to direct the light source quickly and efficiently. Perfect for precision work!
We have had many calls for larger snap-on nylon dies to fit our CRY-905.00. This set is designed for larger oversized watches that are very popular, and most have snap-on case backs.
Adds 2 1/2X to the magnification. Easily attaches to either eye of optivisor. Swings away when not in use.
High-quality handle has a thick, non-slip PVC coating for continual comfort. 5″ length.
Medium-duty bench knife features a slim 1-3/4″ blade set firmly in hardwood handle. Overall length 5″.
Polished and tempered steel blade with knife edges. Mounted in hardwood handle with metal ferrule. Overall length 4 1⁄2″ (114 mm).
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
These anvils have a flat smooth case hardened surface and can be used as a base for staking, riveting and drilling small parts.
Illuminated 1.75X magnifier provides hands free viewing. Adjustable arm provides light source quickly and efficiently to work area
Suitable for workshop or desktop use. Three Fluorescent bulbs provide ample illumination
3 oil holding cups and 3 dip oiler holders. Heavy-duty steel construction with rubber non-slip base.
Bracelet links remover plier. Comfortable rubber handle for easy grip. Length: 135 mm.
Generic Micro Stella regulator for all Omega Co-Axial 3303/3313
Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.
Metal: Stainless Steel
Length 6-1/2″
Point: Serrated tip
With fiber grips for heat resistance. Overall length 6-1/2 inches
Has two steel chucks with spare chuck held in end of hollow brass handle. Will not roll off your bench. Capacity 0 to .079″ (0 to 2.0 mm).
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
Excellent work surface for delicate parts. Pad size measures 50mm in diameter.