Watch Tools
Browse Subcategories
Medium-duty bench knife features a slim 1-3/4″ blade set firmly in hardwood handle. Overall length 5″.
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
Different size steel collets are mounted in both ends of hollow handle. Capacity 0 to .099″ (0 to 2.5 mm), overall length 4-1/4″
Hold watch straps in place while repairing or changing a battery without having to remove the band. Comes with a nylon die that will not mar or scratch crystals.
Bracelet links remover plier. Comfortable rubber handle for easy grip. Length: 135 mm.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Made in Germany, this plier is the best quality pin remover on the market. The round nose fits snugly into the recessed pin to snap it out cleanly. Length 5″ (125mm).
18-24 sticks per bundle, depending on diameter.
Stick Length: 7″
Diameter: 6.0mm
6″ lengths in assorted sizes from 20 to 70 by drill gauge. Packed in plastic tubes.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
With fiber grips for heat resistance. Overall length 6-1/2 inches
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
Calypso Waterproofing Machine – Cylinder Gasket – 70mm. Round O ring gasket for between cover and cylinder. 70mm in diameter.
Bergeon Luminous Paste Varnish – refill for BG5680. Mix with luminous powder and thinner.
We have had many calls for larger snap-on nylon dies to fit our CRY-905.00. This set is designed for larger oversized watches that are very popular, and most have snap-on case backs.
A safe and easy way to remove unbreakable watch crystals without dismantling the watch. The jaws open from 12 to 37mm and are designed for both ladies’ and gents’ watches.
Vigor Super Glue sets in 45 to 60 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. No-drip, precision applicator allows for glue to be dispensed one drop at a time. Pack of 5 – 2 Gram Tubes
This rack features a 7-1/2″ bar area for easy accessibility to your favorite pliers. Two “tray extensions”, each with two round depressions, for holding small parts or bits of solder.
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
This special die set made of high-impact nylon is excellent for revolving bezels on Rolex and other fine watches. You will find this set of dies to be an enhancement and work excellent with the CRY-905.00.
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.
The Bench Pin Saw Vise is the perfect tool for holding metal wood or plastic for easy sawing. A necessity for the jeweler’s bench as well as for the hobbyist or craft person. Fits in standard bench slot or clamps on table.
Polished hardwood stand (for set of seven screwdrivers, numbers 3 to 9 for baguette and pocket sizes) with carborundum sharpening stone built into base and a side compartment for spare blades. Designed especially for watchmakers. Nickel-plated to prevent rust.
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.40-0.50mm
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.60-0.70mm
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 85 mm, thickness 0.08 mm.
To protect the components when take off / setting hands or bezels and opening/closing of screwed or pressured case backs. Strong and flexible.
Ø 60 mm, thickness 0.08 mm.
Spring action holds screwdriver firmly in place. Steel wheels are carefully set into body to provide even action when wheeled over stone. Overall width is 19/16″ (40mm).
Essential for removing pins from metal link bands. Made of Keltec II glass-filled nylon this unit includes two extra spacers to accommodate all bracelet sizes and two extra push pins. The pusher pin is hardened tool steel. We guarantee years of satisfaction with this tool which will not scratch or mar gold or silver.
This magnifier measures only 4″ long and features a 30mm 30X magnification lens. It also features a toggle switch to go between LED an UV light, and an on/off switch for illuminating. 2 CR2016 batteries included. Comes with small protective pouch.
Fiber tips will not mar the dial. Sturdy jaws retract when side springs are pressed. Center plunger holds the hands firmly.
Trays are round at the base and will hold up to an 18 size movement plate. Interlocking design allows the trays to be stackable. Each tray measures approximately 3″ x 3/4″ (76 x 19 mm).
This link pin remover set comes complete with 10 pins in sizes: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.50 and 2.00mm.
Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm
This is the replacement blade for the Right Handed Bergeon Case Opener Tool 6987.
Ideal for transporting your watch, glasses or other fragile items.
Adds 2 1/2X to the magnification. Easily attaches to either eye of optivisor. Swings away when not in use.
Our HANDY BLOCK is a 4-1/2″ x 6″ block of cured hardwood with 88 holes for organizing burs, needle files, beaders, mini brushes, etc.
Use the basket with your Gemoro ultrasonic cleaner to suspend your jewelry piece within the ultrasonic tank while it’s cleaning.
Our stainless steel cleaning baskets are universal as they will fit virtually any ultrasonic unit. With practical side clips they can be used with smaller ultrasonic units as well as larger ones.