Watch Case Tools
Browse Subcategories
Modeled after the famous JAXA but less expensive this case wrench meets the highest standards at a moderate price. Packed in a hardwood box. Sets of spare pins also sold separately. 5-1/2 length.
Deluxe bench knife features riveted handle and tempered blade. Excellent for opening watch cases. Length: 5-1/4″ (135mm).
Hold watch straps in place while repairing or changing a battery without having to remove the band. Comes with a nylon die that will not mar or scratch crystals.
Kit includes: Watch Band Block, Spring Bar Tool, 3 Punch Pins of popular Sizes, 3 Screwdrivers, Vetus Tweezer, Nylon Head Mallet and replacement blades & pins.
Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm
Specially designed, hard rubber Friction Ball Watch Case Opener opens screw back style watch cases easily, and without any possibility of scratching. Inexpensive, easy-to-use and will not leave marks. Size 2-1/2″ Diameter.
Excellent work surface for delicate parts. Pad size measures 50mm in diameter.
This Watch Bezel Remover is ideal for use on gold cases and bezels that are commonly used on Rolex and other expensive watches.
Polished and tempered steel blade with knife edges. Mounted in hardwood handle with metal ferrule. Overall length 4 1⁄2″ (114 mm).
It is great for curing ultraviolet glue for mineral watch crystal assembly, diamond grading, and other jewelry repairs.
Plastic pads to place over wrist watch dials for protection whilst removing hands.
Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.
This special die set made of high-impact nylon is excellent for revolving bezels on Rolex and other fine watches. You will find this set of dies to be an enhancement and work excellent with the CRY-905.00.
For those hard to open cases this is your best tool! Quality made and easy to use.
Designed to make opening watch cases easier. Just position the point between the case back and the case and slowly push.
Set of 3 Pins for L-G Opener “Multinotch cover”
Set of 3 Pins for L-G Opener “Knurled Type Cover”
For opening and closing screw backs and bezels. Has two cup sizes for 0 to 18s watches.
Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.
For opening oyster-shaped cases made by Rolex. Includes the wrench and six dies in the appropriate sizes: 18.5 20.2 22.5 26.5 28.3 and 29.5mm.
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
Configured to make opening certain cases easier this 3 opener is popular among many watchmakers. Simply place the blade under the case back and twist.
High-Performance Diamond Polish for any real glass watch crystals
Set of 14 sizes 00 to 12. Steel shanks with traditional brass for years of life.
For making watch parts, loupe springs and many other things requiring spring steel. Tempered and ready for use. Comes in 36″ coils, in B&S gauges as noted.
Nylon dies to fit square or rectangular watches to use with case closer CRY-905.00. Five sizes to a set dies range from 15mm to 24mm. Offers you greater flexibility to close any snapback case without damage.
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
This Nylon Die Set is a replacement set of fourteen dies for CRY-905.00
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
We have had many calls for larger snap-on nylon dies to fit our CRY-905.00. This set is designed for larger oversized watches that are very popular, and most have snap-on case backs.
Set of six large aluminum dies to accommodate larger watches. Use with screw type case closer/crystal press. Set includes the following size dies: • 45-47mm • 50-53mm • 54-55mm • 56-57mm • 58-60mm • 62-64mm
Opens all sizes and shapes of waterproof cases. Comes with four sets of pins for case backs with notches holes knurled or polygon.
The six tempered rings are precision-made to interlock so they will not slip. The sturdy cast frame fits into your bench vise and the small bar gives you the torque you need for stubborn case backs.
25 Piece Set : 24 Nylon, Non-Mar Dies! Straight Wall, Flat & Rectangular Dies. Up to 60mm!
“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.
Big watches are popular! This new version of the original Jaxa style case wrench now accommodates larger size watches up to 55mm diameter.
Inner Bezel Fitting Die for Rolex. Used in newer sapphire cases. 32.00mm interior opening.
High quality, stainless steel dies are machined perfectly to fit the Breitling® cases.
Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.
Tool for assembling and disassembling screw-on watch pushers and watch tubes, and watch oscillating weight bolts. Assortment of 14 interchangeable keys in metal storage base.
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.