Watch Case Tools

Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.

Rubber tool for extracting rotating bezels from 38 to 45 mm.

Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.

Horizontal-type vise with center support allows for positioning blades on two sides at once.  The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm.  Swiss.

Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]

4mm forked end refill for MSA10.302.

Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.

Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns

For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.

This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.

Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.

Tool for assembling and disassembling screw-on watch pushers and watch tubes, and watch oscillating weight bolts. Assortment of 14 interchangeable keys in metal storage base.

Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.

HSS Tap For Screw Pushers, Ø 2.50 x 0.20 mm

HSS Tap For Screw Pushers, Ø 2.50 x 0.25 mm

High quality, stainless steel dies are machined perfectly to fit the Breitling® cases.

Inner Bezel Fitting Die for Rolex. Used in newer sapphire cases. 32.00mm interior opening.

Big watches are popular! This new version of the original Jaxa style case wrench now accommodates larger size watches up to 55mm diameter.

“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.

25 Piece Set : 24 Nylon, Non-Mar Dies! Straight Wall, Flat & Rectangular Dies. Up to 60mm!

Includes 24 nylon dies.

Knurled Jaws for Horotec Press. Fits Mini or Maxi Press.

The six tempered rings are precision-made to interlock so they will not slip. The sturdy cast frame fits into your bench vise and the small bar gives you the torque you need for stubborn case backs.

Opens all sizes and shapes of waterproof cases. Comes with four sets of pins for case backs with notches holes knurled or polygon.

Set of six large aluminum dies to accommodate larger watches. Use with screw type case closer/crystal press. Set includes the following size dies: • 45-47mm • 50-53mm • 54-55mm • 56-57mm • 58-60mm • 62-64mm

We have had many calls for larger snap-on nylon dies to fit our CRY-905.00. This set is designed for larger oversized watches that are very popular, and most have snap-on case backs.

Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.

Menzerna 491FF, Polishing paste for stainless steel, fine polish, white, 250 gram bar

Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.

This Nylon Die Set is a replacement set of fourteen dies for CRY-905.00

Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.

Nylon dies to fit square or rectangular watches to use with case closer CRY-905.00. Five sizes to a set dies range from 15mm to 24mm. Offers you greater flexibility to close any snapback case without damage.

Omega 31mm Reduction Ring

Omega Seamaster Gents Caseback Key

For making watch parts, loupe springs and many other things requiring spring steel. Tempered and ready for use. Comes in 36″ coils, in B&S gauges as noted.

Set of 14 sizes 00 to 12. Steel shanks with traditional brass for years of life.

High-Performance Diamond Polish for any real glass watch crystals

Configured to make opening certain cases easier this 3 opener is popular among many watchmakers. Simply place the blade under the case back and twist.

Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.

Choose from: 18.5, 20.2, 22.5, 26.5, 28.3, and 29.5 mm

For opening oyster-shaped cases made by Rolex. Includes the wrench and six dies in the appropriate sizes: 18.5 20.2 22.5 26.5 28.3 and 29.5mm.

Round Jaws for Horotec Press. Fits Mini or Maxi Press.

Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.

For opening and closing screw backs and bezels. Has two cup sizes for 0 to 18s watches.

Set of 3 Pins for L-G Opener “Knurled Type Cover”

Set of 3 Pins for L-G Opener “Multinotch cover”

Set of 3 Pins for L-G Opener “Polygon cover

Set of 3 Pins for L-G Opener “Round Style”