Watch Case Tools
Browse Subcategories
“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.
25 Piece Set : 24 Nylon, Non-Mar Dies! Straight Wall, Flat & Rectangular Dies. Up to 60mm!
The six tempered rings are precision-made to interlock so they will not slip. The sturdy cast frame fits into your bench vise and the small bar gives you the torque you need for stubborn case backs.
Opens all sizes and shapes of waterproof cases. Comes with four sets of pins for case backs with notches holes knurled or polygon.
Set of six large aluminum dies to accommodate larger watches. Use with screw type case closer/crystal press. Set includes the following size dies: • 45-47mm • 50-53mm • 54-55mm • 56-57mm • 58-60mm • 62-64mm
We have had many calls for larger snap-on nylon dies to fit our CRY-905.00. This set is designed for larger oversized watches that are very popular, and most have snap-on case backs.
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
Menzerna 491FF, Polishing paste for stainless steel, fine polish, white, 250 gram bar
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
This Nylon Die Set is a replacement set of fourteen dies for CRY-905.00
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
Nylon dies to fit square or rectangular watches to use with case closer CRY-905.00. Five sizes to a set dies range from 15mm to 24mm. Offers you greater flexibility to close any snapback case without damage.
For making watch parts, loupe springs and many other things requiring spring steel. Tempered and ready for use. Comes in 36″ coils, in B&S gauges as noted.
Set of 14 sizes 00 to 12. Steel shanks with traditional brass for years of life.
High-Performance Diamond Polish for any real glass watch crystals
Configured to make opening certain cases easier this 3 opener is popular among many watchmakers. Simply place the blade under the case back and twist.
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
Choose from: 18.5, 20.2, 22.5, 26.5, 28.3, and 29.5 mm
Rolex Case Back Opening Die for Stainless Steel Daytona 126500 42mm Models. Will work work both Horotec and Bergeon Openers.
For opening oyster-shaped cases made by Rolex. Includes the wrench and six dies in the appropriate sizes: 18.5 20.2 22.5 26.5 28.3 and 29.5mm.
Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.
For opening and closing screw backs and bezels. Has two cup sizes for 0 to 18s watches.
Set of 3 Pins for L-G Opener “Knurled Type Cover”
Set of 3 Pins for L-G Opener “Multinotch cover”
Designed to make opening watch cases easier. Just position the point between the case back and the case and slowly push.
For those hard to open cases this is your best tool! Quality made and easy to use.
This special die set made of high-impact nylon is excellent for revolving bezels on Rolex and other fine watches. You will find this set of dies to be an enhancement and work excellent with the CRY-905.00.
Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.
Plastic pads to place over wrist watch dials for protection whilst removing hands.
It is great for curing ultraviolet glue for mineral watch crystal assembly, diamond grading, and other jewelry repairs.
Polished and tempered steel blade with knife edges. Mounted in hardwood handle with metal ferrule. Overall length 4 1⁄2″ (114 mm).
This Watch Bezel Remover is ideal for use on gold cases and bezels that are commonly used on Rolex and other expensive watches.
Excellent work surface for delicate parts. Pad size measures 50mm in diameter.
Specially designed, hard rubber Friction Ball Watch Case Opener opens screw back style watch cases easily, and without any possibility of scratching. Inexpensive, easy-to-use and will not leave marks. Size 2-1/2″ Diameter.
Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm
Kit includes: Watch Band Block, Spring Bar Tool, 3 Punch Pins of popular Sizes, 3 Screwdrivers, Vetus Tweezer, Nylon Head Mallet and replacement blades & pins.
Hold watch straps in place while repairing or changing a battery without having to remove the band. Comes with a nylon die that will not mar or scratch crystals.
Deluxe bench knife features riveted handle and tempered blade. Excellent for opening watch cases. Length: 5-1/4″ (135mm).
Modeled after the famous JAXA but less expensive this case wrench meets the highest standards at a moderate price. Packed in a hardwood box. Sets of spare pins also sold separately. 5-1/2 length.
Plastic movement holder for positioning hands and checking the chronograph function.