Shop
Browse Subcategories
This new Bracelet Bench Block is the ideal size for working on bracelets and other large pieces.
Saves time when setting stones, while eliminating the need for messy shellac. Suitable for prong, pave or channel settings on bracelets up to 9/32″ wide and will not mar or distort.
Smooth steel oval mandrel is designed for bracelets with a taper from 2-1/8″ x 3″ to 1-1/4″ x 1-3/8″. Length 15″.
Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 9/16″ (14 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 1/2 oz. (71 g)
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 9/16″ (14 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 1/2 oz. (71 g)
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 5/8″ (16 mm)
Head Length: 2 5/8″ (67 mm)
Head Weight: 5 oz. (142 g)
This 2 oz. hammer features a superb quality solid brass head threaded onto an anodized aluminum handle. A special compound is used to assure the head cannot release.
Steel collet Is set into hollow brass handle with screw chuck. Capacity is 0 to .028″ (0 to .71mm), overall length 3-1/8″.
Well balanced handle is lightweight for just the right amount of spring.
Face Diameter: 1/2″ (13 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 oz. (57 g)
Our scratch brushes with pen-shaped handles are used for removing rust or corrosion in hard to reach places. The brass model is excellent for cleaning clogged burs.
For cleaning work before soldering. Brass wire bristles are approximately 1-3/4″ long and bound in metal holder.
Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 7-1/4″.
Brush has four rows of .003″ wire and is 3-1/4″ L x 3/4″ H. Overall length 8-1/4″.
Measures in inches and millimeters. Capacity 4″ or 100 mm.
Tweezers are very soft and non-magnetic
Include the following styles: #3, #5, AA, MM and AM
Come in a convenient storage pouch
6″ lengths in assorted sizes from 20 to 70 by drill gauge.
6″ lengths in assorted sizes from 14 to 21 by B&S gauge. Used to make pins, rivets, hinges, etc.
For cleaning, polishing and finishing. Made from natural rubber with graded pumice grain evenly distributed to assure uniform results. The light action produces a smooth finish on soft metals. Arbor hole is 1/16″.Sold by the box of 100.
BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.
For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.
For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.
For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.
For general purpose work. Contains 12 of the most used sizes within the stub range indicated. Packed in convenient tubes.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life. The lengths vary from approximately 1-3/4″ to over 7″, with diameters gauged slightly below largest portion of the cutting edges.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 13/4″ long. Sold by the dozen.
Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 13/4″ long. Sold by the dozen.
Superior quality, perfectly tapered and true to size for precision work. All have round handles and are 13/4″ long. Sold by the dozen.
Brown MOD One Piece Leather Strap
Standard, fast-cutting brown tripoli, used when rouge will be used for final finish, medium box, 1lb
Shaped for holding Burno style crucibles. Length 10-1/2 inches (267 mm).
Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.
3.5 x 2.0 tap 10, medium post, Sport top, Stainless Steel, 25 pieces