Shop
Browse Subcategories
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.
Face Diameter: 9/16″ (14 mm)
Head Length: 2″ (51 mm)
Head Weight: 2 1/2 oz. (71 g)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Metal: Non-Magnetic Stainless Steel
Length: 4-1/2″
Point: Sharp
Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)