Shop

Ground from blanks of hardened high speed steel, these files have smooth, unbroken flutes. The design is particularly well-suited for filing mild steels and ductile, stringy materials such as aluminum, brass, lead and magnesium. They can also be used on some grades of plastics. Ground cut rotary files perform best at medium speeds in flexible shaft machines and air tools.

1/4″ shank with 2 1/4″ overall length

Use for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the Flat file without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom – One edge single cut – One edge is safe.

The Mill file has many applications such as sharpening saws and tools, finishing metal, lathe work, draw filing as well as general shop use. All sides are single cut.

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 1/8″ (3.0 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 5/64″ (2.0 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 5/32″ (4.0 mm)

Thickness: 3/64″ (1.3 mm)

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 5/32″ (4.0 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Handles are knurled.

Overall Length 6-1/4″ (160 mm)

Width 7/32″ (5.5 mm)

Thickness 1/16″ (1.4 mm)

Cut 2

Replacement blade for the Gucci screw removing tool (SKU# 750.0204). Sold by the piece.

BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.

Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.

Genuine Omega 20mm Black Textured Calf Watch Band 97361079.  Takes a 16mm buckle(not included)

This 14pc Tap and Die set has screwplate with taps for threading wire or re-threading stripped threads on screws. Sizes 0.7 – 2.0mm.

Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.

Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.

Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.

Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.

Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.

Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.

Solid felt wheel assortment includes 1/2″, 5/8″, and 3/4″ diameter wheels in the soft grade. For use with a mandrel.

Sold by the box of 1.

1/2″ diameter, brass center, medium grit, aluminum oxide. Mounted on thin backing, provides excellent results in sanding and smoothing operations.

Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.

Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center to provide firm grip on tapered spindle. Sold individually.

Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Leather center provides firm grip on tapered spindle. Sold individually.

Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.

Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.

Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.

Diameter: 1″

Fine

3/32″ Shank

Sold by the dozen

Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.

Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.

Miniature muslin buffs are perfect for polishing and finishing hard to reach places and small objects.

Wedding band sizer, sizes 1 to 15.

The perfect material for polishing all types of metals the chamois cloth has been recognized for years as the ultimate. Try this genuine white 10 x 10 chamois for final polishing.

Bergeon 5285-210 Staking Punch

Panasonic CTL-621 Lithium Rechargeable Battery (CTL-621F).  Found in many Casio watches.

Panasonic CTL-1025 Rechargeable Battery.  Used in Casio watches and others.

Reduced Height Version- Overall Height 3.70mm
Size 7 3/4
Hand Size 70/120/20
Battery 364
Date @3

Size 10 1/2 L

Hand Size 70/120/18

Battery 373

Hadley Roma Stainless Steel Expansion Watch Band to fit 16-22mm ends.  18mm body width.

Hadley Roma Tapered Stainless Steel Expansion Watch Band to fit 16-21mm ends.  15mm body width

Hadley Roma Ladies Steel Expansion Band to fit 10-14mm ends.  Shiny rails, satin finish center.

Grey, medium pre-polisher for precious metals.