Shop
Browse Subcategories
Long recognized for the clean, sharp surfaces they produce on tools, dies, blades, molds and almost any other metal piece requiring sharpening or smoothing.
Premium quality white aluminum oxide for dressing, truing, roughing and finishing diamond wheels.
Double End Replacement Tip for Japanese Spring Bar Tool
This popular model is called “Japanese” because it originated in Japan and features a special shaped fork tip. Many people prefer this shape for getting under straps and bands. Anodized aluminum body with hardened tool steel double-ended tip. Length: 5-1/4″ (135mm).
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life.
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life. The lengths vary from approximately 1-3/4″ to over 7″, with diameters gauged slightly below largest portion of the cutting edges.
Pink Hi-Shine
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 100
Pink Hi-Shine
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
Ruby Mounted Point, .186″ Diameter, .520″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .205″ Diameter, .090″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .117 Diameter, .259″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .106″ to .065″ Diameter, .237″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .095″ to .063″ Diameter, .3″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .109″ to .065″ Diameter, .338″ Head Length, 3/32″ Shank, sold individually.
For cleaning, polishing and finishing. Made from natural rubber with graded pumice grain evenly distributed to assure uniform results. The light action produces a smooth finish on soft metals. Arbor hole is 1/16″.Sold by the box of 100.
Excellent small particle adhesion provides superior surface finishing. Specially processed micro grains provide additional cutting surfaces for fast material removal. Sold in boxes of 100. Size 9″ x 13-3/4″
Sold by the box of 100.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Sold by the box of 100.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Rubber head. Turn screw to expand head and tighten band.
Rubber head. Turn screw to expand head and tighten band.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only Sold individually.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only. Sold individually.
Ground from blanks of hardened high speed steel, these files have smooth, unbroken flutes. The design is particularly well-suited for filing mild steels and ductile, stringy materials such as aluminum, brass, lead and magnesium. They can also be used on some grades of plastics. Ground cut rotary files perform best at medium speeds in flexible shaft machines and air tools.
1/4″ shank with 2 1/4″ overall length
Use for rapid metal removal on sharp corners, shoulders and flat surfaces. This double cut file is similar to the Flat file without the taper. The Hand file offers one safe edge which reduces damage to the workpiece when filing up to a corner. Double cut top and bottom – One edge single cut – One edge is safe.
The Mill file has many applications such as sharpening saws and tools, finishing metal, lathe work, draw filing as well as general shop use. All sides are single cut.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)