Shop
Browse Subcategories
The replacement blades are hardened blue steel.
You save
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
Horotec Hand Remover Set, 4mm width. Works for many pocket watch hands.
Horotec Hand Remover Set, 2.5mm width
A pair of hands removers for sweep second hands and the small counter hands of chronographs. Tip width 1.0mm, length 105mm
Green dip oiler with a medium point. 2 spare needles are stored inside the handle. Swiss Made
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Horotec Flash Test is designed to be used on quartz watches with the cases opened or closed. Easily check for electronic circuit pulse, test battery voltage, and un-jam train wheels.
This steel tool is used to install the Rolex® screw on pushers into a Rolex® watch case. McCaw Co. is independent of and not affiliated with or sponsored by Rolex®. Warranty does not apply to non-genuine parts supplied by McCaw Co.
Set of double-ended wheel countersinks in tempered steel – 4 pieces Our set includes 4 double-ended wheel countersinks made of high-quality tempered steel, perfect for watchmaking and precision tasks. Specifications: Wheels diameters: 1.80-2.10 / 2.50-3.00 / 3.50-4.00 / 4.50-5.00 mm Delivered in a convenient plastic pouch for easy storage and transportation.
Horotec Concave Delrin Die. For replacement of delrin die on Maxi-Press & Mini Press.
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
You save
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
Casing cushion with a gray anodized aluminum ring. 75mm in diameter.
Horotec Carbon Tip Tweezers, Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Horotec Carbon Tip Tweezers, Extra Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Blue dip oiler with a fine point. 2 spare needles are stored inside the handle. Swiss Made
Black dip oiler with a very fine point. 2 spare needles are stored inside the handle. Swiss Made
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Made in France. Includes rotating stand. Screwdriver sizes 0.50-3.00mm.
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
18 different popular sizes, 2 pieces each size.
18 different popular sizes, 2 pieces each size.
Horotec Assortment of Case Back Screws, Round Head. 18 sizes, 10 pieces each size
Horotec Assortment of Case Back Screws, Phillips Head. 17 sizes, 10 pieces each size
Horotec Assortment of Case Back Screws, Flat Head. 18 sizes, 10 pieces each size
Oil cup in yellow anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in red anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in green anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in blue anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Aluminum tweezers with curved, fine PEEK tips. Tips are replaceable. Use MSA12.765-A for replacements. 4 3/4″ in length.
Aluminum tweezers with very fine PEEK tips. Tips are replaceable. Use MSA12.764-A for replacements. 4 3/4″ in length.
Aluminum tweezers with fine PEEK tips. Tips are replaceable. 4 3/4″ in length.
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
Screwdriver sizes include: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.0, 2.5 & 3.0. Replacement blades included. Swiss made.
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.
Screwdriver sizes include: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50. One replacement per size included. Rotating stand is made of solid aluminum and has a non-skid base. Top quality screwdriver set.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
Horotec #S5 bronze tweezers. Fine Tips, non-marring. 5″ in length.
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
Easily removes spring bars without having to take off the clasp. Angled for easier use. Tips are reversible, with an extra pair included. Hex driver to change tips included. Size: 4 1/2″ x 1 3/4″ Max opening is 32mm.
Easily removes spring bars without having to take off the clasp. Tips are reversible, with an extra pair included. Hex driver to change tips included. Size: 4 1/2″ x 1 3/4″ Max opening is 32mm.
Horofix Replacement Screws for Screwdrivers, 2pk. For the 2100 series screwdrivers.
For all gold, silver and platinum soldering. This is a white borax-based paste which provides substantial oxide protection. This should be used in addition to a firecoat on the joints to be soldered.
Contain no asbestos. Lightweight blocks reflect heat and perforations hold pins to keep work in place while heating. Withstands temperatures up to 2000F (1093C).
Use to prepare surfaces for soldering, remove excess solders, remove burs, etc. Sharp from handle to tip and can be resharpened on a bench stone.
Punch 2mm holes in leather or plastic bands with this handy plier. Great for sizing bands. Length 5-1/2 -145mm-.
Cuts smooth, clean holes in leather watchbands. Plated steel with contoured handle for comfort.
Overall length is 5″ (127 mm).
Hoke Jewel Torch for Oxygen & Natural Gas. Comes with 3 tips.
Hoke Jewel Torch for Oxygen & Artifical Gas. Comes with 4 tips.
With these tips you get a non-oxidizing flame, so less pickling is required and jewelry comes out cleaner. Changing tips takes only a few seconds to speed up your production (HOKE-JEWEL torch must be purchased separately).