Shop
Browse Subcategories
Great, inexpensive way to store beads and findings safely and separately.
3/4″ x 1-3/4″ x 3/4″
Extra Fine
Size: 5/8″ x 1/8″
Hole: 1/16″
Box of 100
Extra Fine
Size: 5/8″ x 1/8″
Hole: 1/16″
Box of 20
Long recognized for the clean, sharp surfaces they produce on tools, dies, blades, molds and almost any other metal piece requiring sharpening or smoothing.
Premium quality white aluminum oxide for dressing, truing, roughing and finishing diamond wheels.
Double End Replacement Tip for Japanese Spring Bar Tool
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life. The lengths vary from approximately 1-3/4″ to over 7″, with diameters gauged slightly below largest portion of the cutting edges.
Pink Hi-Shine
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 100
Ruby Mounted Point, .186″ Diameter, .520″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .205″ Diameter, .090″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .117 Diameter, .259″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .106″ to .065″ Diameter, .237″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .095″ to .063″ Diameter, .3″ Head Length, 3/32″ Shank, sold individually.
Ruby Mounted Point, .109″ to .065″ Diameter, .338″ Head Length, 3/32″ Shank, sold individually.
For cleaning, polishing and finishing. Made from natural rubber with graded pumice grain evenly distributed to assure uniform results. The light action produces a smooth finish on soft metals. Arbor hole is 1/16″.Sold by the box of 100.
Excellent small particle adhesion provides superior surface finishing. Specially processed micro grains provide additional cutting surfaces for fast material removal. Sold in boxes of 100. Size 9″ x 13-3/4″
Sold by the box of 100.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Sold by the box of 100.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Rubber head. Turn screw to expand head and tighten band.
Rubber head. Turn screw to expand head and tighten band.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only Sold individually.
Single-Cut
Overall Length: 5 1/2″ (14 cm)
Smooth cut only. Sold individually.
Ground from blanks of hardened high speed steel, these files have smooth, unbroken flutes. The design is particularly well-suited for filing mild steels and ductile, stringy materials such as aluminum, brass, lead and magnesium. They can also be used on some grades of plastics. Ground cut rotary files perform best at medium speeds in flexible shaft machines and air tools.
1/4″ shank with 2 1/4″ overall length
The Mill file has many applications such as sharpening saws and tools, finishing metal, lathe work, draw filing as well as general shop use. All sides are single cut.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/64″ (2.0 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.4 mm)
Cut 2
Replacement blade for the Gucci screw removing tool (SKU# 750.0204). Sold by the piece.
BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.
Genuine Omega 20mm Black Textured Calf Watch Band 97361079. Takes a 16mm buckle(not included)
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Solid felt wheel assortment includes 1/2″, 5/8″, and 3/4″ diameter wheels in the soft grade. For use with a mandrel.
Sold by the box of 1.
Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center to provide firm grip on tapered spindle. Sold individually.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Diameter: 1″
Fine
3/32″ Shank
Sold by the dozen
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Miniature muslin buffs are perfect for polishing and finishing hard to reach places and small objects.
The perfect material for polishing all types of metals the chamois cloth has been recognized for years as the ultimate. Try this genuine white 10 x 10 chamois for final polishing.
Panasonic CTL-621 Lithium Rechargeable Battery (CTL-621F). Found in many Casio watches.