Shop
Browse Subcategories
Metal: Stainless Steel
Length: 5-1/2:
Point: Fine
Finish: Bright
You save (%)
Extra long with straight smooth points. Overall length 7 inches (178 mm).
Metal: Stainless Steel
You save (%)
6-1/4 inches long with fine points.
Metal: Nickel Plated Carbon
Finish: Black
You save (%)
Metal: Stainless Steel with Black Finish
Length: 5-1/2″
Point: Fine
You save (%)
Metal: Stainless Steel
Length: 4-1/2″
Point: Very Sharp
You save (%)
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
You save (%)
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
You save (%)
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
You save (%)
Accommodates standard stamps with approximately 5/16″ square bodies. Eliminates the need to hold ring and stamp in one hand. Simply position ring over mar-proof plastic anvil (55.201) and tap stamp with mallet. Easy and accurate time-saver. Eliminates slipping of ring. Also ideal for flat stamping. The sleeve can be reversed or the stamp body can be touched up with a file if stamp is not 5/16″ square. Stamps not included.
You save (%)
Ingenious dispenser contains solder with flux. The proper amount of solder and flux can be placed at the exact point required, eliminating waste and improving the appearance of the joint. Solder contains no cadmium. 1/2 oz.
You save (%)
Available in 1/4 oz. sheets.
Grade: Easy
Melting Point: 1240°F (671°C)
You save (%)
13 1/2 L
5.90mm thick
Hand Size 90/150/32
3 Eye Chrono
Big Date @12
Battery 394
You save (%)
13 1/2 L
5.10mm thick
Hand Size 90/150/32
3 Eye Chrono
Date Dial @4
Battery 394
You save (%)
13 1/2 L
5.10mm thick
Hand Size 90/150/32
2 Eye Chrono
Date Dial @3
Battery 394
You save (%)
Melts solder in 90 seconds. Perfect for fine jewelry work.
You save (%)
Cross-locking, 6 1/2″ tweezers closes when released. Mounted on heavy-duty horseshoe base.
You save (%)
Genuine Seiko Plastic Crystal 327W15AN00
You save (%)
Knurled chuck holds the point in either the scribing position or reversed within the steel body so that it can be carried safely in a pocket. Hexagonal head prevents rolling on bench and knurled body provides secure gripping. Nickel-plated. Economy version.
Handle Diameter: 1/4″
You save (%)
Frame for 5 inch pinned blades
Designed with “S” bends to the frame, it accommodates unobstructed viewing directly over the area to be cut. The frame is equipped with an ergonomic pistol grip handle fabricated with reinforced fiber-filled plastic. Knurled thumbscrew provides easy-to-use blade tension control. Manufactured at our factory in Vallorbe, Switzerland.
You save (%)
Jewelers Sawframe with End Screw, 2-1/2″ Depth
You save (%)
Grobet Swiss-style. Revolutionary design in three lightweight, perfectly balanced sawframes. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. 23/4″ (70 mm) deep. * Blade tightening screw must be opened wide enough to allow sawblades to be inserted all the way.
You save (%)
Manufactured at Grobet’s factory, Scies Miniatures, in Vallorbe, Switzerland.
Thickness: .024″
Width: .053″
Teeth per Inch: 24
You save (%)
Designed for wax cutting. Every other tooth is eliminated to provide smooth cutting and non-loading action. One dozen size #1 blades to a package. Sold by dozen.
You save (%)
Thickness: .019″
Width: .040″
Teeth per Inch: 30
Sold by the dozen.
You save (%)
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
You save (%)
Recommended for fine finishing and burnishing precious metals, brass, bronze and similar materials with plastic, ceramic or metal media. Supplied with Raytech MFA metal finishing kits. Use approximately 1 tsp. per pint of water.
You save (%)
Standard, fast-cutting tripoli, used when rouge will be used for final finish.
You save (%)
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.
Red rouge for platinum, gold and silver.
You save (%)
Eliminates the mess and does away with broken bars. Peel-back cardboard tube exposes only the amount needed.
For producing a rich, dark luster on white gold, platinum, or silver. 5 oz.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
You save (%)
Designed to hold grinding wheel on right side of motors with 1/2″ straight shaft. For wheels with 1/2″ hole. Steel.
You save (%)
For standard dental taper polishing motors.
You save (%)
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
You save (%)
For use with wheels up to 3″ diameter and 1/4″ thick, with 1/4″ arbor holes.
For standard dental taper polishing motors.
For right side of motor.
You save (%)
Replacement basket 12 oz. for Ferris Electric Picklers, 45.306-1.
You save (%)