Shop

Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.

Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.

This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.

Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 35mm in diameter.

Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 45mm in diameter.

Slotted Plastic Block Horotec is made of high impact plastic. This slotted block has 9 holes, and 8 slots, slots measure from 2.8 mm wide to 6.3 mm wide.

Horotec Polishing Vice For Watch Case Backs Ø25-50mm

Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.

Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.

Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.

Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657

Red dip oiler with a large point. 2 spare needles are stored inside the handle. Swiss Made

Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.  

Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.

Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.

MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.

Replacement Peek tips for Horotec tweezers MSA12.764. 1 pair.

Replacement Peek tips for Horotec tweezers MSA12.765. 1 pair.

Horotec Replacement Screwdriver Blades, Curved Style for better screw fit. These are the replacement blades for MSA01.207. 13 sizes

Replacement Tip for Horotec Case Opener MSA07.115 – 2mm

Replacement Tip for Horotec Case Opener MSA07.115 – 4mm

Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.

Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.

Rubber tool for extracting rotating bezels from 38 to 45 mm.

Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.

Horizontal-type vise with center support allows for positioning blades on two sides at once.  The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm.  Swiss.

Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]

4mm forked end refill for MSA10.302.

Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.

Set of 4 Horotec Swiss dip oilers with plastic handles and extra needles. 2 spare needles are stored inside the handle.

Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns

Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually

Small tool for bracelet screws.
– 3 blades Ø 1.00, 1.40 and 3.00 mm
– Metal anti-skid base.

For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.

The Turbo tester tests quartz wheel trains without opening the watch. Swiss made. The Turbo tests the mechanical side of a quartz analog watch movement.

This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.

Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.

Tool for assembling and disassembling screw-on watch pushers and watch tubes, and watch oscillating weight bolts. Assortment of 14 interchangeable keys in metal storage base.

Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).

Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.

Twin hose assemblies are supplied with connections (9/16″ fittings). Comes in 10′ length. Hoses are black with color coded lines. Red for fuel and green for oxygen. Included are ferrules and ferrule tools. Made with DuPont™ Kevlar® Fiber

Used on regulators so that standard ID hose can be used. Left Hand Thread for Fuel Gas. Size: 3/8″ – 24 for 3/16″ ID

Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 3/8″ -24 for 3/16″ID

Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 9/16″ – 18 for 3/16″ ID

HSS Tap For Screw Pushers, Ø 2.50 x 0.20 mm

HSS Tap For Screw Pushers, Ø 2.50 x 0.25 mm

I Ring Crystal Gasket for 1.5mm Crystals- Individual Sizes

I Ring Crystal Gasket for 1mm Crystals- Individual Sizes