Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.

33.5-41.5 Half and Whole Sizes + 43.0mm

I Ring Gasket Assortment for 2.0mm Crystals, Half and whole sizes 16.0-40.0. 2 pieces each, 49 sizes, 98 pieces total. Refills available separately.

I Ring Gasket Assortment for 2.0mm Crystals, Half and whole sizes 40.5-50.0. 2 pieces each, 20 sizes, 40 pieces total. Refills available separately.

Size 13 1/2L
4.52mm thick
Hand Size 65/110/20
Date Dial @3
3 Eye Chrono Hand Size 21
302334R Capacitor

14mm Black PVC Divers Watch Strap

Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.

Genuine Omega Stainless Steel Link 114ST1957

Pressure gauge for Reimers JR steamer. Bottom mounted.

Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.

Face Diameter: 9/16″ (14 mm)

Head Length: 2″ (51 mm)

Head Weight: 2 1/2 oz. (71 g)

#5 Stainless Steel Economy Tweezers Metal: Stainless Steel Length: 4-1/2″ Point: Very Sharp

Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.

336pcs 2 x 5mm
168pcs 2 x 20mm

4″ Hi Temp Flask Seal. Arbe KG-180

Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 5, 1.20mm.

Brown leather smooth watch band 11mm

Miyota 4T13 Quartz Watch Movement. Date dial@3

Avoid the high cost of prescription safety glasses. Save money over prescription safety glasses. Safety glasses and corrective lenses combined into one, for close-up work. These glasses compare to drug store “readers” while conforming to ANSI Z87.1 2003 specifications for high impact protection. Check with your Eye Doctor for the best diopter model for you.

Oval-shaped steel burnishers for smoothing of bezels around stones and smoothing other parts of soft metals. Highly polished blades are firmly set in wood handles.

Sturdy, quick acting tool for removing all types of hands from watches and instruments. Hands are removed by pushing downward on the plunger-type handle. Center post acts as a guide and holds hands after removal.

Metal: Stainless Steel

Length: 5-1/2:

Point: Medium

Finish: Bright

Overall length 6-1/4 inches.

Metal: Stainless Steel

Length: 5-1/2″

Point: Cup Shaped Coated

Metal: Stainless Steel

Length: 4-1/2″

Point: Sharp

Tri-Electronics Pro Cleaning Solution, GXL 24

A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.

Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications.

60 pc Assortment with separate Hour and Minute Hands allowing for numerous combinations. Sizes will fit many calibers of brands such as ETA, Felsa, Font, A.Schild, Le Coultre and Omega 470 & 550.

Genuine Seiko BA0V04GCSF King Seiko Vanac Crystal. New old stock. Fits Seiko case#: 5626-5070

Handy tool for pushing prongs or crown points around stones. Steel tool mounted in wood handle.

Can be used on hard jewels, metals, etc. Hexagonal aluminum handle prevents rolling on bench. Length 5-1/4″.

Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.

Revolutionary lightweight design, perfectly balanced saw frames. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. Blade tightening screw must be opened wide enough to allow saw blades to be inserted all the way.

For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.

Linde A for precious gems, gold, silver and other metals.

1 oz. Bottle

For use with wheels having 1/16″ arbor holes. Sold by dozen.

For use with wheels having 1/16″ arbor holes. Sold by dozen.

Set the graver to the required length and lock in position with the set screw. Useful for working with gravers of short length. Comes with an allen wrench.

Size 5 1/2 x 6 3/4 L
2.50mm thick
Hand Size 70/120
Very High canon pinion version
Battery 379