Shop
Browse Subcategories
Red tinted synthetic oil for quartz analog watches. Non-toxic, non-spreading, long-lasting, good viscosity. 2cc.
General purpose synthetic oil. Synta-Lube (Rolex 2900). Thinner than 9010/2
Synta-Visco-Lube. Use in slower moving parts and larger watch movements. Ideal for lubricating the pivot of staffs, oscillating weights and other parts of automatic watches. 2cc
Synta-Frigo-Lube Lubricate mehcanical movements exposed to the lowest temperatures to minus 40°C. 2cc
Synta-Frigo-Lube. Same as 9030/2 but for plastic parts in quartz and clock movements.
Moebius SYNT-HP 500 9101 High Pressure Lubricant, 2 ML, Small Movements
Moebius SYNT-HP 750 9102 High Pressure Lubricant, 2 ML, Medium Movements
High pressure oil for precision mechanisms. Ideal for mechanical and chronograph watches. 1000 viscosity, 2ml
Moebius SYNT-HP 1300 9104 High-Pressure Lubricant, 2 ML, Large Movements
Specifically designed for use on pallets. 2 ml. Bergeon 941-2.
Synthetic Grease (Rolex 2911) Lubrifar all-purpose synthetic grease used on watches, clocks, pallets and escapements. 2cc
Synthetic Grease #9501 (Rolex 2913) Dark blue synthetic grease from Moebius is for slow moving, time setting steel frictions. ETA recommended. 10cc
Moebius 9504 is a synthetic grease recommended for time setting & cannon pinions, winding calendar & chronograph mechanism. Light, colorless, and stays in place. This grease is great for use with watches that have exhibition backs.
Moebius Microgliss D-5, 20ml. Mineral oil for high-pressure bearings. Viscosity 1200 cSt at 20° Celsius
Surgically sharp blades fit into comfortable plastic handle. Widely used for cutting rubber molds.
Used to hold uncured rubber and model when vulcanizing. Made of aluminum alloy for best heat conduction
Used to hold uncured rubber and model when vulcanizing. Made of aluminum alloy for best heat conduction
Used to hold uncured rubber and model when vulcanizing. Made of aluminum alloy for best heat conduction
Rigid, metal plates for placing over mold frame openings when vulcanizing uncured rubber. Provides a more uniformly shaped and solidly packed mold. Set of two pieces.
Molykote DX Grease, 50 Gram Tube. ETA recommended lubrication of metal components for certain calibers.
1/2″ diameter, brass center, coarse grit, aluminum oxide. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
1/2″ diameter, brass center, medium grit, aluminum oxide. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
7/8″ diameter, fine grit, aluminum oxide, brass center. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Inverted
Diameter: 11/15″
3/32″ Shank
Sold individually.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 11/16″
3/32″ Shank
Sold by the Dozen
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 13/16″
3/32″ Shank
Sold by the Dozen.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Pointed
3/32″ Shank
3/32″ Shank
Sold individually.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Round
3/32″ Shank
3/32″ Shank
Sold individually.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Horotec movement holder with central screw for caliber 1530-1570
Horotec movement holder with central screw for caliber 2035-2135
Horotec movement holder with central screw for caliber 3035
Multi-purpose 1/8 HP machine, with variable speeds from 0 to 10,000 RPM.
The Multisizer works like a belt with a buckle, which easily wraps around the finger, going over the knuckle. When you tighten it into a comfortable fit, an arrow indicates the precise finger size.
Mushroom Pin for Buckle Assortment, 60 pcs. 12 different sizes, 5 pieces each size. Stainless.
Extra-fine muslin buff for use with the Vigor Multi-Grinder.
Stronger and smoother for a clean print. Mounted three across on flat, pin-feed, fan-folded sheets. Waterproof and safe for ultrasonics.
Scissor handle shears are great for cutting heavier metals and copper plate up to B & S gauge #20. This narrow blade model has large loop handles that are extra comfortable.
Nato Style Black Nylon Watch Strap, 20mm. Stainless hardware.
Nato Style Navy Blue Nylon Watch Strap, 20mm. Stainless hardware.