Shop
Browse Subcategories
Base for screwing and unscrewing bracelets. Includes 4 screwdriver blades 1.0, 1.4, 1.8, 3.0 mm. Blade height can be easily adjusted with the thumb screw. 70mm base.
High quality tweezers for watchmakers. Wooden tips Quick and easy replacement of tips Non-magnetic steel tweezers
Bergeon bracelet cutter. Cuts sprues up to 1/8″ (3mm) thick. Jaws are 7/8″ (2mm) long and pointed for easier access to tight areas. Made in Switzerland.
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
Bergeon Red Watchmaker’s pick positions batteries and watch parts without marring by using this 5 1/4in polystyrene tool. BG-6436 has one flat and one pointed end.
Bergeon Swiss Made pocket watch keys. 5 different size winding keys. The arms are for sizes 3, 5, 7, 9, and 11.
Bergeon Swiss Made pocket watch keys. 5 different size winding keys. The arms are for sizes 2, 4, 6, 8, and 10.
Bergeon Scratch Brush Refills-12 piece pack
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Very-Fine ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Semi-Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4″ Diameter, 3/4″ Thick, 1″(25mm) Hole Diameter with a 3/8″(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Coarse ARTIFEX Silicium carbide supple wheels for grinding, polishing, satin finishing of all precious metals. 4in Diameter, 3/4in Thick, 1in. (25mm) Hole Diameter with a 3/8in.(10mm) reducer hole. Maximum speed: 1900 RPM. Bergeon Swiss made.
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
This is the double ended replacement tip for Bergeon Swiss Made Spring Bar Tool (6111). The tip is reversible with a pointed tip on one end and a forked tip on the other.
Fine silicium carbide circular abrasive wheel by Bergeon
Produces a Fine Satin Slightly Matte Finish
You save (%)
1.20mm forked remover for watch hands, wheels and rollers.
Drum barrel made to fit over a standard watchmaker’s screwdriver to give you a better grip and more torque. With a knurled finish, the barrel attaches to screwdriver with a set-screw. 4 sizes available.
You save (%)
First quality rotating stand with 9 screwdrivers from Bergeon. Very stable stand with adherent rubber plate.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Bergeon Luminous Paste Varnish – refill for BG5680. Mix with luminous powder and thinner.
Bergeon Luminous Paste kits in six colors: White, green, yellow, blue, red & orange
You save (%)
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
Plexi-cylinder Bergeon ref. 5555-98 -TP. Made for waterproof tester Bergeon Ref. 5555-98
This is the complete gasket replacement kit for the Bergeon 5555/10 waterproof tester. Contains 15 different rubber o-ring gaskets.
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Bergeon pair of small levers for removing hands have plastic handles, two different tip widths. Swiss.
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
Soft and will not scratch the parts. Matches the shape of watch cases with different geometries.
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
3mm Transparent plastic stick can be sharpened without flaking. 5″ long.
Bergeon 5011-B Replacement Key for Crown & Stem Removal
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
Bergeon watch case opener. Swiss made. Lever width 5mm, lever length 110mm.
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
Pin Vice for cutting broaches. Reamer with chuck opening.
Vissin special formula acidic solution removes broken steel screws from brass watch plates without damaging plates. Use crucible and crucible stand to heat. 50mL
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.