Shop
Browse Subcategories
Slotted Plastic Block Horotec is made of high impact plastic. This slotted block has 9 holes, and 8 slots, slots measure from 2.8 mm wide to 6.3 mm wide.
You save (%)
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
You save (%)
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
You save (%)
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
You save (%)
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
You save (%)
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
You save (%)
Horotec red anodized aluminum loupe fitted with a threaded ring. Lightweight and compact. 5X = 2″ focal distance.
You save (%)
Anodized aluminum handle (Ø 6 mm) for a comfortable grip Length: 100 mm (4″) Tip diameter: 0.80 mm Fork width: 1.20 mm Stainless steel tips for enhanced durability Perfect for professionals and watch enthusiasts.
You save (%)
Red dip oiler with a large point. 2 spare needles are stored inside the handle. Swiss Made
You save (%)
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
You save (%)
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
You save (%)
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
You save (%)
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
You save (%)
Replacement Peek tips for Horotec tweezers MSA12.764. 1 pair.
You save (%)
Replacement Peek tips for Horotec tweezers MSA12.763. 1 pair.
You save (%)
Replacement Peek tips for Horotec tweezers MSA12.765. 1 pair.
You save (%)
Horotec Replacement Screwdriver Blades, Curved Style for better screw fit. These are the replacement blades for MSA01.207. 13 sizes
You save (%)
Replacement Tip for Horotec Case Opener MSA07.115 – 2mm
You save (%)
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
You save (%)
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
You save (%)
Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
You save (%)
Rubber tool for extracting rotating bezels from 38 to 45 mm.
You save (%)
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
You save (%)
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
You save (%)
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
You save (%)
4mm forked end refill for MSA10.302.
You save (%)
1.20mm replacement forked tips for Horotec spring bar tools MSA10.305 & MSA 10.309.
You save (%)
.80mm replacement straight tips for Horotec spring bar tools MSA10.305 & MSA 10.309.
You save (%)
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
You save (%)
Horotec stainless steel replacement screwdriver blades. Blades will fit MSA01.020 & MSA01.218 screwdrivers/sets
You save (%)
Set of 4 Horotec Swiss dip oilers with plastic handles and extra needles. 2 spare needles are stored inside the handle.
You save (%)
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
You save (%)
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
You save (%)
Small tool for bracelet screws.
– 3 blades Ø 1.00, 1.40 and 3.00 mm
– Metal anti-skid base.
You save (%)
For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.
You save (%)
The Turbo tester tests quartz wheel trains without opening the watch. Swiss made. The Turbo tests the mechanical side of a quartz analog watch movement.
You save (%)