Shop
Browse Subcategories
Size 10 1/2L
2.71mm thick
Hand Size 70/120
Date Dial @6
Battery 364
Size 13 1/2L
5.1mm thick
Hand Size 90/150/32
2 eye chrono
Date Dial @6
Battery 394
13 ligne
29.3 thickness
White Date dial @13
White Day Dial @12
Generic Omega Speedmaster Crystal 063PW5274. Black tension ring. No Omega symbol. Diameter 31.12mm.
White, hard pre-polisher for precious metals.
Grey, medium pre-polisher for precious metals.
Hadley Roma Ladies Steel Expansion Band to fit 10-14mm ends. Shiny rails, satin finish center.
Hadley Roma Tapered Stainless Steel Expansion Watch Band to fit 16-21mm ends. 15mm body width
Hadley Roma Stainless Steel Expansion Watch Band to fit 16-22mm ends. 18mm body width.
Reduced Height Version- Overall Height 3.70mm
Size 7 3/4
Hand Size 70/120/20
Battery 364
Date @3
Panasonic CTL-1025 Rechargeable Battery. Used in Casio watches and others.
Panasonic CTL-621 Lithium Rechargeable Battery (CTL-621F). Found in many Casio watches.
The perfect material for polishing all types of metals the chamois cloth has been recognized for years as the ultimate. Try this genuine white 10 x 10 chamois for final polishing.
Miniature muslin buffs are perfect for polishing and finishing hard to reach places and small objects.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.
Diameter: 1″
Fine
3/32″ Shank
Sold by the dozen
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center provides firm grip on tapered spindle. Sold individually.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Leather center provides firm grip on tapered spindle. Sold individually.
Synthetic fiber buffs may be used dry to produce a satin finish on gold, silver and other metals. Plastic center to provide firm grip on tapered spindle. Sold individually.
Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.
1/2″ diameter, brass center, medium grit, aluminum oxide. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
Solid felt wheel assortment includes 1/2″, 5/8″, and 3/4″ diameter wheels in the soft grade. For use with a mandrel.
Sold by the box of 1.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
This 14pc Tap and Die set has screwplate with taps for threading wire or re-threading stripped threads on screws. Sizes 0.7 – 2.0mm.
Genuine Omega 20mm Black Textured Calf Watch Band 97361079. Takes a 16mm buckle(not included)
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.
Replacement blade for the Gucci screw removing tool (SKU# 750.0204). Sold by the piece.
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.5 mm)
Thickness 1/16″ (1.4 mm)
Cut 2
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 6
Width: 9/64″ (3.7 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 5/32″ (4.0 mm)
Thickness: 3/64″ (1.3 mm)
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 2
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)
Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 9/64″ (3.5 mm)
Thickness: 3/64″ (1.0 mm)