Shop

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 5/32″ (4.0 mm)

Thickness: 3/64″ (1.3 mm)

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 5/32″ (4.0 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Handles are knurled.

Overall Length 6-1/4″ (160 mm)

Width 7/32″ (5.5 mm)

Thickness 1/16″ (1.4 mm)

Cut 2

Replacement blade for the Gucci screw removing tool (SKU# 750.0204). Sold by the piece.

BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.

Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.

Genuine Omega 20mm Black Textured Calf Watch Band 97361079.  Takes a 16mm buckle(not included)

This 14pc Tap and Die set has screwplate with taps for threading wire or re-threading stripped threads on screws. Sizes 0.7 – 2.0mm.

Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.