Shop

Fits Seiko Movement #s: 3180 Measurements: 1.45 x 0.13 x 420 / 4.5 x 11 x 18.5

Fits Seiko Movement #s: 60M, Goldfeather Measurements: 1.15 x 0.115 x 360 / 2.5 x 10.5 x 15.5

Fits Seiko Movement #s: 460 Measurements: 1.05 x 0.12 x 380 / 1.5 x 12.5 x 14.5

Fits Seiko Movement #s: 402 3140 6220A, 6220B, 6220C, 6220D 6222A, 6222B, 6222C Measurements: 1.05 x 0.13 x 340 / 1.5 x 9 x 14.25

12 1/2L
5.55mm Thick
Hand Size 70/120/18
3 Eye Chrono Hand Size 26
Battery CR2012

MS-910N Mainspring for Certina 414

Available in 1/4 oz. sheets.

Grade: Easy

Melting Point: 1240°F (671°C)

6 x 9 1/2 x 12 1/2 White-a-Loy mainspring

3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).

Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.

Seiko Crystal 310W76HN01 – Generic Fits case number 5H26-7A10

Size 10 1/2L

4.61mm thick

Hand Size 65/110/20

Capacitor 302624T

Grobet USA Swiss Pattern Needle Files are precision files, for exacting work, especially under magnification. Made of the highest quality steel, machined and finished for precision shape, accuracy and balance.

Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).

Includes tube of flexible shaft lubricant(grease) and a set of replacement motor brushes.

Bergeon 5680-B-D Luminous Paste Thinner

3mm points for hard-to-reach areas.

Available in 3 grits – hard, medium, and high-shine.

Use with mandrel #117.0894

This special die set made of high-impact nylon is excellent for revolving bezels on Rolex and other fine watches. You will find this set of dies to be an enhancement and work excellent with the CRY-905.00.

Nature’s Touch Citric Acid Pickle is a mild pickling solution used for silver, gold, brass and copper.

Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.

This 3.33oz tube comes with protective glove and a small brush to reach tight spots. Made in Germany.

The Bench Pin Saw Vise is the perfect tool for holding metal wood or plastic for easy sawing. A necessity for the jeweler’s bench as well as for the hobbyist or craft person. Fits in standard bench slot or clamps on table.

A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool

Great for stamping, chasing and forming these 5″ Round Leather Sandbags can be used with or without a bench block.