Horotec
Replacement Peek tips for Horotec tweezers MSA12.765. 1 pair.
Aluminum tweezers with curved, fine PEEK tips. Tips are replaceable. Use MSA12.765-A for replacements. 4 3/4″ in length.
Replacement Peek tips for Horotec tweezers MSA12.764. 1 pair.
Aluminum tweezers with very fine PEEK tips. Tips are replaceable. Use MSA12.764-A for replacements. 4 3/4″ in length.
Aluminum tweezers with fine PEEK tips. Tips are replaceable. 4 3/4″ in length.
Oil cup in yellow anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in green anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in blue anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Oil cup in red anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.
Horotec Key For Screw-on tubes Ø 3.00 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.95 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.75 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.65 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Flash Test is designed to be used on quartz watches with the cases opened or closed. Easily check for electronic circuit pulse, test battery voltage, and un-jam train wheels.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
Calypso Waterproofing Machine – Cylinder Gasket – 70mm. Round O ring gasket for between cover and cylinder. 70mm in diameter.
PEEK stick – Beveled End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
PEEK stick – Pointed End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 45mm in diameter.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 35mm in diameter.
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.
Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
Casing cushion with a chromed metallic ring. 75mm in diameter.
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 232x48x15mm
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 49x41x16
Glass bottle for Epilame with a built in steel mesh basket for holding small parts. Use with Moebius Fixodrop or other epilame. With your epilame fluid in the bottle place your watch part in the steel mesh basket and insert in the top half of the bottle. Replace cap and turn up side down to […]
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm