Horotec

Replacement Peek tips for Horotec tweezers MSA12.763. 1 pair.

Aluminum tweezers with fine PEEK tips. Tips are replaceable. 4 3/4″ in length.

Oil cup in blue anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm

Horotec Key For Screw-on tubes Ø 2.75 mm.  Replacement key for MSA03.621, MSA03.622, & MSA 03.623

4mm forked end refill for MSA10.302.

Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.

Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.

Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually

Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.  

3 pliers with end cutting, round and serrated flat jaws. Swiss Made.

Oscillating Weight Axle Punch for Rolex 2130/2135

Oscillating Weight Axle Punch for Rolex 1530/1570

Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688

For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.

18 different popular sizes, 2 pieces each size.

Bracelet links remover plier. Comfortable rubber handle for easy grip. Length: 135 mm.

Replacement Tip for Horotec Case Opener MSA07.115 – 4mm

Replacement Tip for Horotec Case Opener MSA07.115 – 2mm

Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns

Asco Swiss Made loupe. Type H, 7x. 25mm diameter. Screw in bezel for easy lens cleaning.

Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.

Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.

For closing/opening watches with screw on backs.

Horizontal-type vise with center support allows for positioning blades on two sides at once.  The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm.  Swiss.

Case opener specially made for Baume &amp Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec

1.20mm replacement forked tips for Horotec spring bar tools MSA10.305 & MSA 10.309.

.80mm replacement straight tips for Horotec spring bar tools MSA10.305 & MSA 10.309.

Oil cup in green anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm

Red dip oiler with a large point. 2 spare needles are stored inside the handle. Swiss Made

Blue dip oiler with a fine point. 2 spare needles are stored inside the handle. Swiss Made

Green dip oiler with a medium point. 2 spare needles are stored inside the handle. Swiss Made

This steel tool is used to install the Rolex® screw on pushers into a Rolex® watch case.     McCaw Co. is independent of and not affiliated with or sponsored by Rolex®. Warranty does not apply to non-genuine parts supplied by McCaw Co.

Replacement Peek tips for Horotec tweezers MSA12.765. 1 pair.

Aluminum tweezers with curved, fine PEEK tips. Tips are replaceable. Use MSA12.765-A for replacements. 4 3/4″ in length.

Replacement Peek tips for Horotec tweezers MSA12.764. 1 pair.

Aluminum tweezers with very fine PEEK tips. Tips are replaceable. Use MSA12.764-A for replacements. 4 3/4″ in length.

Oil cup in yellow anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm

Oil cup in red anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm

Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.

Horotec Key For Screw-on tubes Ø 3.00 mm.  Replacement key for MSA03.621, MSA03.622, & MSA 03.623

Horotec Key For Screw-on tubes Ø 2.95 mm.  Replacement key for MSA03.621, MSA03.622, & MSA 03.623

Horotec Key For Screw-on tubes Ø 2.65 mm.  Replacement key for MSA03.621, MSA03.622, & MSA 03.623

Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657

Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.

Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.

Calypso Waterproofing Machine – Cylinder Gasket – 70mm. Round O ring gasket for between cover and cylinder. 70mm in diameter.

Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.

Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.