Horotec
BLASOLUBE® 301 universal lubricant grease for a very wide-ranging use. Excellent for high pressure applications. – Soft consistency – Temperatures use range : from -30° C up to +120/150° C.
Contents: 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
BLASOLUBE® 301 universal lubricant grease for a very wide-ranging use. Excellent for high pressure applications.
5 Delrin® Screw-on Reversible Dies for Fitting Large Case Bezels
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
Screwdriver sizes include: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50. One replacement per size included. Rotating stand is made of solid aluminum and has a non-skid base. Top quality screwdriver set.
This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Precision Incabloc oiler with a gilt aluminum handle and three spare tips included.
Replacement tips (needles) for Horotec Incabloc Oiler. Sold as one piece each.
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
Glass bottle for Epilame with a built in steel mesh basket for holding small parts. Use with Moebius Fixodrop or other epilame. With your epilame fluid in the bottle place your watch part in the steel mesh basket and insert in the top half of the bottle. Replace cap and turn up side down to […]
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 49x41x16
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 232x48x15mm
Casing cushion with a chromed metallic ring. 75mm in diameter.
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Horotec UV Pen Light. Can be used to cure UV adhesive and detect dust. Uses two AAA batteries (not included).
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.
Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 35mm in diameter.
Plastic protective case made specifically to protect watch dials. Case features a plastic, flexible support for the back of dial and small post in the lid to secure your dial. 45mm in diameter.
PEEK stick – Pointed End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
PEEK stick – Beveled End Refill. 4.5 x 16mm. Refills for Horotec Peek Stick Hand Tool with Aluminum Anodized Grey Handle MSA26.009.
Calypso Waterproofing Machine – Cylinder Gasket – 70mm. Round O ring gasket for between cover and cylinder. 70mm in diameter.
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Horotec Flash Test is designed to be used on quartz watches with the cases opened or closed. Easily check for electronic circuit pulse, test battery voltage, and un-jam train wheels.