Horotec
This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
Aluminum tweezers with fine PEEK tips. Tips are replaceable. 4 3/4″ in length.
Aluminum tweezers with very fine PEEK tips. Tips are replaceable. Use MSA12.764-A for replacements. 4 3/4″ in length.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Aluminum tweezers with curved, fine PEEK tips. Tips are replaceable. Use MSA12.765-A for replacements. 4 3/4″ in length.
Horotec Hand Remover Set, 4mm width. Works for many pocket watch hands.
A pair of hands removers for sweep second hands and the small counter hands of chronographs. Tip width 1.0mm, length 105mm
Horotec Hand Remover Set, 2.5mm width
20mm, 30mm, 33mm & 42mm 5 prong case back openers for Omega Seamaster watches. Horotec Swiss Made.
For use in screw-in and unscrew of pusher tubes. Aluminum Handle. Three different tubes sizes available. Swiss Made.
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Four-oil cup chrome-plated stand. The complete set is chromed and incudes : – 4 cups in anti-hygrometric glass – 1 mobile black plastic lid to protect oil from dust – 3 holes filled with pith wood for cleaning the oilers – 1 groove for oiler storage – 1 anti-skid rubber sole to ensure a good […]
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
Generic Microstella wrench for regulating the balance on Rolex calibers
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
BLASOLUBE® 301 universal lubricant grease for a very wide-ranging use. Excellent for high pressure applications. – Soft consistency – Temperatures use range : from -30° C up to +120/150° C.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
Screwdriver sizes include: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.0, 2.5 & 3.0. Replacement blades included. Swiss made.
3 pliers with end cutting, round and serrated flat jaws. Swiss Made.
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
5 Pliers with cutting(2x), half round, round and flat jaws. Comes with wooden block for storage. 130mm length.
5 Delrin® Screw-on Reversible Dies for Fitting Large Case Bezels
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
18 different popular sizes, 2 pieces each size.
The Turbo tester tests quartz wheel trains without opening the watch. Swiss made. The Turbo tests the mechanical side of a quartz analog watch movement.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
Glass bottle for Epilame with a built in steel mesh basket for holding small parts. Use with Moebius Fixodrop or other epilame. With your epilame fluid in the bottle place your watch part in the steel mesh basket and insert in the top half of the bottle. Replace cap and turn up side down to […]
Episurf-Neo® is a new generation high performance epilame agent.
Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
Stainless Friction Pusher Assortment, Antique Style, 36 pieces. Includes diameters 3.50-6.00 with various tube openings and taps. 16 sizes, 2 pieces each.
Yellow Friction Pusher Assortment, Antique Style, 36 pieces. Includes diameters 3.50-6.00 with various tube openings and taps. 16 sizes, 2 pieces each.
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Made in France. Includes rotating stand. Screwdriver sizes 0.50-3.00mm.
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
18 different popular sizes, 2 pieces each size.
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
Contents: 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.