Horotec
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
5 Pliers with cutting(2x), half round, round and flat jaws. Comes with wooden block for storage. 130mm length.
5 Delrin® Screw-on Reversible Dies for Fitting Large Case Bezels
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
18 different popular sizes, 2 pieces each size.
The Turbo tester tests quartz wheel trains without opening the watch. Swiss made. The Turbo tests the mechanical side of a quartz analog watch movement.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
Glass bottle for Epilame with a built in steel mesh basket for holding small parts. Use with Moebius Fixodrop or other epilame. With your epilame fluid in the bottle place your watch part in the steel mesh basket and insert in the top half of the bottle. Replace cap and turn up side down to […]
Episurf-Neo® is a new generation high performance epilame agent.
Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
Stainless Friction Pusher Assortment, Antique Style, 36 pieces. Includes diameters 3.50-6.00 with various tube openings and taps. 16 sizes, 2 pieces each.
Yellow Friction Pusher Assortment, Antique Style, 36 pieces. Includes diameters 3.50-6.00 with various tube openings and taps. 16 sizes, 2 pieces each.
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Made in France. Includes rotating stand. Screwdriver sizes 0.50-3.00mm.
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
18 different popular sizes, 2 pieces each size.
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
Contents: 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Screwdriver sizes include: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50. One replacement per size included. Rotating stand is made of solid aluminum and has a non-skid base. Top quality screwdriver set.
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
Horotec Polishing Vice For Watch Case Backs Ø25-50mm
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
Tool for assembling and disassembling screw-on watch pushers and watch tubes, and watch oscillating weight bolts. Assortment of 14 interchangeable keys in metal storage base.
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
For closing/opening watches with screw on backs.
Horotec Flash Test is designed to be used on quartz watches with the cases opened or closed. Easily check for electronic circuit pulse, test battery voltage, and un-jam train wheels.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.