Horotec
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
Economy watchmakers watch case opening knife, 1 penknife blade, 1 case opening blade. White finish. Swiss Army Style.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
Professional Screwdriver Sharpener. Mainly used by watchmakers who repair high end watches, especially on blued and gold screws.
Asco Swiss Made loupe. Type H, 2.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 3x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 3.5x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 4x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 7x. 25mm diameter. Screw in bezel for easy lens cleaning.
Asco Swiss Made loupe. Type H, 10x. 25mm diameter. Screw in bezel for easy lens cleaning.
Horotec Carbon Tip Tweezers, Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Horotec Carbon Tip Tweezers, Extra Fine Tips, Aluminum, 130mm. Will not scratch delicate parts
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Comes with standard brush and 12 mm diameter round concave tip. Great for lens, watch crystals, and dials.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
Latex roll on finger cots size large. Package of 100 pieces.
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
Tool for assembling and disassembling screw-on watch pushers and watch tubes, and watch oscillating weight bolts. Assortment of 14 interchangeable keys in metal storage base.
Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.
Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.
For closing/opening watches with screw on backs.
A pair of hands removers for sweep second hands and the small counter hands of chronographs. Tip width 1.0mm, length 105mm
Generic Microstella wrench for regulating the balance on Rolex calibers
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
The Turbo tester tests quartz wheel trains without opening the watch. Swiss made. The Turbo tests the mechanical side of a quartz analog watch movement.
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
Horotec Pulse tester checks the electronic parts in analog watches. This particular tester was designed to test the coils and circuits of the watches.
Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.
Molykote DX Grease, 50 Gram Tube. ETA recommended lubrication of metal components for certain calibers.
Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.
20mm, 30mm, 33mm & 42mm 5 prong case back openers for Omega Seamaster watches. Horotec Swiss Made.